Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 4m 13d Gender: Male Location: South West QLD Posted 14/11/11 09:13 AM Share Posted 14/11/11 09:13 AM Coolerworx is as idiot proof as you are gonna get.. Do a search for HDI and you'll find some horror stories in varies forums and alot of them also call into question the quality of the actual coolers. Link to comment Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 4m 13d Gender: Male Location: South West QLD Posted 14/11/11 09:15 AM Share Posted 14/11/11 09:15 AM There are a few people running 310-320 on the FG XR6T turbo using F6 injectors around 98-100% duty cycle.. Link to comment Share on other sites More sharing options...
josho85 Member 8 Member For: 13y 1m 1d Posted 14/11/11 11:47 AM Author Share Posted 14/11/11 11:47 AM Thanks for the tips. So, next question - what type of injectors should I go for and how much $?Is there an off-the-shelf coolerwerx kit with piping that will bolt on with no hassles, where to buy from??Cheers Link to comment Share on other sites More sharing options...
josho85 Member 8 Member For: 13y 1m 1d Posted 14/11/11 11:52 AM Author Share Posted 14/11/11 11:52 AM Frankston for Pitlane Performance... that's miles away for me lolAny reputable Ford tuners out the Northern Suburbs?? Link to comment Share on other sites More sharing options...
234Fpv Donating Members 522 Member For: 13y 5m 5d Gender: Male Location: Yeppoon qld Posted 14/11/11 06:59 PM Share Posted 14/11/11 06:59 PM 400RWKW?!?!? Wow, how does it go? How much is your total spend? Have you done a qrtr mile yet with decent rubber?Does the Clutch/Driveline hold up with that much grunt....nice RideI've only had it done for about a month and so far everything is holding up good except tyres. I was expecting the clutch to be a problem but so far it's all good. I spent roughly six and a half doing all the work myself with a hand doing the exhaust. I haven't taken it down the strip yet but hopefully will be on Friday night. How much power will you be chasing in the long run? If you plan on doing more later I'd recommend going for a bigger cooler. Link to comment Share on other sites More sharing options...
josho85 Member 8 Member For: 13y 1m 1d Posted 15/11/11 09:54 AM Author Share Posted 15/11/11 09:54 AM If I can get around 350 rwkw I will be wrapped. With your setup and power, you should be able to get into low 11s/high 10s on the quarter if you throw a couple of semi-slicks on for the night... Either that, or drop your gearbox :IThe killer for us Fords is launching nicely.Let us all know what pass you are able to make... Link to comment Share on other sites More sharing options...
FPVF6355 Member 128 Member For: 13y 10m 25d Posted 04/12/11 09:38 PM Share Posted 04/12/11 09:38 PM The thing that I like about the HDI set is its 100% complete, delivered to your door. I dont need to muck around with custom pipework etc, unless Coolerwerx provide a similar idiot proof assembly?Frankston for Pitlane Performance... that's miles away for me lolAny reputable Ford tuners out the Northern Suburbs??Also, I have been continuously told that the F6 fuel pump and Injectors are good for 350kw+??? Is this not that case?If possible I would much prefer to confine my mods to Cooler, Boost and Tune with a higher flow exhaust (gutted cat). For interests sake, apparently the stock F6 exhaust flows quite nicely and there isn't much to be gained from ripping it out and dropping another $600-800 on a new system (at least)Your thoughts.....Blue power racing are in Northern suburbs.They did my F6 and I am pretty happy. They are pretty straight up and will only tell you what you need to do, to get to your RWKW.Mine has stock piping and cooler, 60lb injectors, high flow cat.They tuned it to 300 and backed it off to 290 because they said the stock fuel pump was at it's limit.They also said the stock cooler was not worth changing unless I wanted much bigger numbers.This is my first turbo, and I said I wish it had the low down grunt of a V8, so they tuned it and hey presto it pulls like a V8 and blows V8's over 100 klicks.My first tuner did what Blue power described as "A dirty tune" it was gutless at the bottom end, and had alot of power loss on warm days.After BP tuned it, the power just comes on smoothly even on a hot day, and as BP described it "A bit violent up the top of the revs" "be careful"When I floor it, you've got to be quick on gear changes, because the top end blisters towards redline and over rev protection alot quicker than previous tune.So basicly they can get it to 300 with injectors, cat, fuel pump.If you tell them what numbers you want, they won't sell you stuff you won't need. Link to comment Share on other sites More sharing options...
Snapper Bronze Donating Members 320 Member For: 13y 7m 25d Gender: Male Posted 06/12/11 08:37 AM Share Posted 06/12/11 08:37 AM Is it safe to run standed injectors at 98 % Link to comment Share on other sites More sharing options...
johno Donating Members 773 Member For: 14y 2m 3d Gender: Male Location: Mt Gambier, SA Posted 06/12/11 09:19 AM Share Posted 06/12/11 09:19 AM Is your F6 a BF, or FG? 40 engine kw difference for a start if its an FG. Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m Gender: Male Posted 06/12/11 09:26 AM Share Posted 06/12/11 09:26 AM my first tune was PW cooler and tune with stock fg f6 injectors. mine were at 90. fg f6 injectors r good for mid 300's mate.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now