King Ssl Not That Low

[bossmang]

well if ssl isnt low enough go sssl

if you want your car to look lowered, im pretty sure the sssl are the best combo atm, with ssl fronts!

[JETURBO]

that's what it has as op said ....................................................ssl all round atm..........................................front looks jacked up....................................all part numbers correct for ssl......................................are the fg gt 335 springs different to fg 5.4ltr?

[senna_T]

With The Cyote motors we have found that they weigh around the same as the I6 motor - so the HD coils can be too heavy...

In saying that though, we put an SLHD coil in the front of a GS ute (cyote motor) and it dropped 20mm, so it seems there may be a spring seat change somewhere in the line up - neither us or Kings have seen enough cars that vary to narrow it down though...

[JETURBO]

other than hd lowered can u get a lowered minus the hd? so soft spring rate?

[senna_T]

Yes you can, just the normal part numbers that go down to SSSL front and SP4 rear (SSSSL)

The strange thing is that all the other HD versions that kings do are usually the same installed height as the normal versions - the free height is what changes to keep it the same.

[JETURBO]

these were the new ones with the progressive tops on em look the goods and apparently felt good just no reduction in height looked same as stock height front but rear was lower

do the fg series need a split combo like the (b series with the sl/ssl )???????

what do u install pat? whats the recomendation even further could u please post up the part numbers?

[senna_T]

Ultimately recommendation is completely up to the customer and the result they want.

We did a GT Black recently, SSSL front, SP4 rear, but I can't seem to gt it off my phone, I''ll try and upload a pic tonight of it

[JETURBO]

cheers pat

[.BLKPHN.]

Any one got photos of ssl front and sp4 or sssl rear in a b series

[MexicanBatman]

I have the s s s s L in my FG they aren't that low, so don't get excited

Comparing them to the ssl then the sssl I have had in this car before these the ssssl would be spot on if they continued it to a sssssl, I don't want to compress them and I'm too lazy to get a pair made to that height even though it's cheap

Edited 15/11/11 09:15 AM by MexicanBatman