tpinto Donating Members 103 Member For: 16y 4m 19d Gender: Male Location: NSW Posted 11/11/11 11:38 PM Share Posted 11/11/11 11:38 PM Hi all , Took the car in to Tunehouse for a service and some extra work and also a check up on the tune to make sure everything was running as it should be. Got a call from Tony yesterday morning to inform me that there was a problem with the Xcal 2 as it would not allow any settings to be changed after a software update. I ended speaking to Jim who informed that he had Just spoken to SCT and that the Xcal 2 was no longer supported if the vehicle has the ZF but will be at this stage if it has a manual box. This was due to the ZF tuning software now available with the update and that the only way around this was a Xcal 3, so my Xcal 2 is now nothing but crap unless I decide not to retune or have the settings touched or if I just want to change between tune type... SCT thanks alot there goes another $800 , when are you blokes going to bring out the Xcal 4 to make the 3 Ive just been forced to purchase because Ive got a ZF that I dont want touched redundant also ??? Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/ Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 8m 3d Gender: Male Location: Zombie Birdhouse Posted 12/11/11 12:10 AM Share Posted 12/11/11 12:10 AM So a basic tune cannot be performed and uploaded with an Xcal 2 , news to me other than ability to perform ZF tranny tunes.If you are in fact correct this thread will go feral in no timeAnyone in the know ? 1 Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158840 Share on other sites More sharing options...
tpinto Donating Members 103 Member For: 16y 4m 19d Gender: Male Location: NSW Posted 12/11/11 04:24 AM Author Share Posted 12/11/11 04:24 AM Well I hope its true because that is what I was told by Jim from Tunehouse and that is why I just dished out $800 on top of another tune this morning for an Xcal 3...If its not true then someone has not been honest with me and Ive just thrown $800 in the trash......But I'm sure that is not the case, well I'm certain that is not the case. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158911 Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 10m 26d Gender: Male Location: @ my laptop Posted 12/11/11 04:58 AM Share Posted 12/11/11 04:58 AM You have been told the truth. Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158919 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 4m 28d Gender: Male Location: Probably above atmospheric pressure Posted 12/11/11 05:00 AM Share Posted 12/11/11 05:00 AM Ho-lee sheeeet. Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158920 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 6m 30d Gender: Male Location: Perth Posted 12/11/11 05:02 AM Share Posted 12/11/11 05:02 AM SCT = round 2 1 Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158921 Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 10m 26d Gender: Male Location: @ my laptop Posted 12/11/11 05:05 AM Share Posted 12/11/11 05:05 AM X2 will still work on any BA, but only BF and FG's without ZF trans Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158923 Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 8m 3d Gender: Male Location: Zombie Birdhouse Posted 12/11/11 05:11 AM Share Posted 12/11/11 05:11 AM screwed again into having to update . Xcal 4 must only be 2 weeks away 1 Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158924 Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 6m 11d Gender: Male Location: Mackay QLD Posted 12/11/11 05:16 AM Share Posted 12/11/11 05:16 AM What is their reason this time?Last time it was supposidly over the unapproved unlocking/flashing of X1 boxes. Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158925 Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 11m 28d Gender: Male Location: Brisbane Posted 12/11/11 05:25 AM Share Posted 12/11/11 05:25 AM Fck me...what a cack of punts. Link to comment https://www.fordxr6turbo.com/forum/topic/77745-xcal-2-no-longer-supported-with-a-zf/#findComment-1158926 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now