Sydneyxr6t Member 63 Member For: 13y 25d Gender: Male Location: Sydney Posted 12/04/12 01:11 PM Share Posted 12/04/12 01:11 PM Timwell done nice sensible mods and great result.What torque are you making?cheersArmando Link to comment Share on other sites More sharing options...
neotim Member 276 Member For: 13y 9m 16d Gender: Male Location: Gold Coast Posted 20/06/12 11:24 PM Author Share Posted 20/06/12 11:24 PM Hey mate what year is it ?It's a May 2011 build mate. Timwell done nice sensible mods and great result.What torque are you making?cheersArmandoThanks Armando. Not sure on the amount of torque I'll find out though 1 Link to comment Share on other sites More sharing options...
neotim Member 276 Member For: 13y 9m 16d Gender: Male Location: Gold Coast Posted 29/07/12 11:45 PM Author Share Posted 29/07/12 11:45 PM Just an update I'm getting the ute retuned fairly soon. Since the last tune I have done a rapid systems 4" turbo side intake. Next I'll be doing ID1000 Injectors, Walbro 300lph fuel pump and the tune. I'm wondering if I'm on the right track with this setup? Will most likely be doing further mods later on down the track (turbo, full exhaust etc) 2 Link to comment Share on other sites More sharing options...
neotim Member 276 Member For: 13y 9m 16d Gender: Male Location: Gold Coast Posted 07/11/12 03:46 AM Author Share Posted 07/11/12 03:46 AM Update, a lot of things have happened the past few months.. Blew the oil pump gears when I missed a gear and redlined the car. Got a new Atomic Oil Pump in there so never have to worry about that again. Other than that I got a retune done and mods now include:- ID1000 Injectors- 4" Rapid Turbo Side- Rapid Intercooler kit- Walbro 400lph pump- 4" dump into 3.5" Xforce Exhaust- 12psi actuator- Turbo port/flapper modCar is now making a strong 317rwkw tuned by Hi-Torque. Turbo has been making lots of bearing noises and I believe its on its way out so bought a GTX3582r which will go in hopefully in the next few weeks. 2 Link to comment Share on other sites More sharing options...
ripped6 Donating Members 246 Member For: 13y 3m 25d Gender: Male Posted 07/11/12 07:19 AM Share Posted 07/11/12 07:19 AM looks good, should pull some decent figures with that GTX bolted in. I'd be looking at throwing in a surge tank with the kinda power you're gonna make though. regardless should be lots of fun 2 Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 9m 12d Gender: Male Posted 08/11/12 07:55 AM Share Posted 08/11/12 07:55 AM sounds good tim. GTX35/82r should get u right up there mate.. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 08/11/12 10:50 AM Share Posted 08/11/12 10:50 AM Gee hi-torque dyno must understate or your turbo's pretty buggered because that's a lot of supporting mods for only 317rwkw. What boost you running?With a gtx and surge + 044 you'll see around about 380rwkw surely Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 19d Gender: Male Location: CQ Posted 08/11/12 11:44 AM Share Posted 08/11/12 11:44 AM It's an fg with small turbo 317 is plenty on pump fuel, well done mate! 2 Link to comment Share on other sites More sharing options...
neotim Member 276 Member For: 13y 9m 16d Gender: Male Location: Gold Coast Posted 08/11/12 02:36 PM Author Share Posted 08/11/12 02:36 PM Hi Torque uses a mainline dyno and it's still fairly new (only a year old I believe) so I've been told my car would read 330rwkw+ on other dynos/dyno dynamics etc. Not too worried about the number anyway the tune feels great and I did a lot of chopping at the cruise 4 charity at QR the other day. Next mods are GTX turbo then gonna wack in a mal wood opt 3+ clutch, mal wood short shifter and atomic valve springs. Surge + 044 will be done a little later down the track. Should see close to 400 with this setup 2 Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 19d Gender: Male Location: CQ Posted 08/11/12 08:39 PM Share Posted 08/11/12 08:39 PM Sounds like you got it all worked out, my only suggestion if shooting for 400kw maybe a malwood stage 5 clutch if you intend on giving it a hiding, the 3+ is great and rated for just over 400 I know but still something to think about 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now