Sydneyxr6t Member 63 Member For: 13y 3m 26d Gender: Male Location: Sydney Posted 08/11/11 04:27 AM Share Posted 08/11/11 04:27 AM (edited) HiI dropped my FG XR6T (ZF 6 speed) in this morning at BTA Motorsports for:Growler CAI3.5" Hurricane high flow catID 1000cc injectorsSCT X3 and custom dynoAnyone done similar mods would care to share rwkw and driver experiences?Will post up dyno report laterCheersArmando Edited 08/11/11 04:33 AM by Sydneyxr6t Link to comment Share on other sites More sharing options...
234Fpv Donating Members 522 Member For: 13y 7m 20d Gender: Male Location: Yeppoon qld Posted 16/11/11 09:34 PM Share Posted 16/11/11 09:34 PM How did ya go mate Link to comment Share on other sites More sharing options...
Sydneyxr6t Member 63 Member For: 13y 3m 26d Gender: Male Location: Sydney Posted 16/11/11 11:14 PM Author Share Posted 16/11/11 11:14 PM Pretty goodWas a hot humid evening in Sydney, 31 degrees and air density was 94.4%Baseline run standard was 237rwkwFinal tune was 294.5rwkw with 750Nm of torqueThe car drives so much better, as soon as you hit the wall of torque at 2000rpm it takes offConsidering a ZF 6 speed flash tune, and with the warmer months ahead, a PWR stepped I/C which should improve quality of air flow to the turbo, and see me join the 300rwkw clubFast enuff for a daily driver.I have a ZX-10R if I want to get fired out of a canon:)cheersArmando Link to comment Share on other sites More sharing options...
234Fpv Donating Members 522 Member For: 13y 7m 20d Gender: Male Location: Yeppoon qld Posted 16/11/11 11:27 PM Share Posted 16/11/11 11:27 PM Awesome result mate. A cooler upgrade would definitely be worth your while. Are you still running stock pipes? I also have a bike (06 hayabusa) but don't seem to ride it much since doing the mods to my car. I'll have to wait till the novelty wears off a bit and get back into it. Hard to beat the feeling of a quick bike Link to comment Share on other sites More sharing options...
Sydneyxr6t Member 63 Member For: 13y 3m 26d Gender: Male Location: Sydney Posted 17/11/11 12:42 AM Author Share Posted 17/11/11 12:42 AM Thanks I was quite happy with results, yes it has standard exhaust apart from Hurricane high flow cat.I wanted to keep the car looking and sounding stock, I/C should definitely keep the air temps stabilized and provide more consistent boost, maybe a little more power.I love cars, but bikes are a completely different experience.Pretty hard to wheel stand a car in any gear:)cheersArmando Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 6m 7d Gender: Male Location: Melbourne, VIC Posted 17/11/11 06:15 AM Share Posted 17/11/11 06:15 AM I think he meant stock cooler pipes...the FG ones are fairly weak I believe and the coolerworx piping seems to be the choice replacement.. Theres currently a group buy goin...Enjoy it mate.. Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 9m 2d Gender: Male Location: Melbourne Posted 17/11/11 06:50 AM Share Posted 17/11/11 06:50 AM Great power through the standard cooler, and pipes too! Nearly 300 on very minimal mods, gotta love these cars. Link to comment Share on other sites More sharing options...
Sydneyxr6t Member 63 Member For: 13y 3m 26d Gender: Male Location: Sydney Posted 17/11/11 08:14 AM Author Share Posted 17/11/11 08:14 AM MikaYeh I should have mentioned my tuner advised me to replace the stock I/C piping with a Herrod kit, looks great:)cheersArmando Link to comment Share on other sites More sharing options...
234Fpv Donating Members 522 Member For: 13y 7m 20d Gender: Male Location: Yeppoon qld Posted 17/11/11 09:05 AM Share Posted 17/11/11 09:05 AM I'd go with the coolerworx kit over herrod. Both good kits but the herrod kit won't allow you to run a battery side intake if you ever choose to. Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 14y 14d Gender: Male Posted 17/11/11 09:09 AM Share Posted 17/11/11 09:09 AM Nice mate.. I see u r using the Growler.. good job. :sungum: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now