bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 26d Gender: Male Location: Melbourne Posted 08/04/13 08:38 AM Share Posted 08/04/13 08:38 AM ute looks sleeper with those rims hahahYeah mate matt from race brakes Sydney recommended it all. Said its about as good as it gets for stock brakes. Also got braided front hoses too.Yeah mate my tailshaft has 2 cv joints the middle one behind the carrier bearing was near stuffed and the rear one was not far off so want to get it sorted before I get back to the drags. Still have not been sense I got my new tune with the new GTX about 6-7 months agoahh the ferodo pads, yep also heard they were the goerwhats the fix for the cv parts then? is there a stronger replacement? Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 6m 29d Gender: Male Location: north QLD Posted 08/04/13 08:50 AM Author Share Posted 08/04/13 08:50 AM Yeah should of wrote that earlier that they were Ferodo lol. Haha yeah stock looking is what im aiming for atm. Yeah think it's a stronger oversize cv unit. Joe said its good for a 1000hp so must be pretty heavy duty. Will wait and see when I get it back and give some details then. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 26d Gender: Male Location: Melbourne Posted 08/04/13 09:00 AM Share Posted 08/04/13 09:00 AM yer that would be goodim looking at the same brakes now, and also looking at tail shaft options hence all the annoying questionshahah Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 6m 29d Gender: Male Location: north QLD Posted 08/04/13 09:11 AM Author Share Posted 08/04/13 09:11 AM All good mate when I get more info on it I will post it up. I will ring cms tomorrow and get some better details on it. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 26d Gender: Male Location: Melbourne Posted 08/04/13 11:05 AM Share Posted 08/04/13 11:05 AM yer that would be sweet Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 6m 29d Gender: Male Location: north QLD Posted 09/04/13 06:15 AM Author Share Posted 09/04/13 06:15 AM Spoke to joe mate there is a few different options and depending on how much power you are looking for. Probably best to give him a ring ford freak he is more then helpful. The one I'm getting gets rid of the cv joints and replaces them with uni joints with a slip yoke. It's like what the v8 brute utes use he said. Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 7d Gender: Male Posted 12/05/13 08:18 AM Share Posted 12/05/13 08:18 AM looking good Geoff. what did the tailsharft cost ya mate.? Link to comment Share on other sites More sharing options...
Nickaz Member 7 Member For: 11y 9m 20d Gender: Male Location: Melbourne Posted 15/06/13 07:49 AM Share Posted 15/06/13 07:49 AM thanks for the comment guys been along time coming with the stuff ups from my last car to now.. very happy with it now the ZF is really an awesome gearbox just hope it holds out for a while.. if I remember it was on full boost from 3500 (19lb) just keeps pulling right through the gears..the wheels are lenso D1R's mate.. 20x8.5 with +35 offset and rears are 20x10 with +32 offset.. im suprised how well it hooks up actually..what size tyres do you need to fit these wheels? Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 6m 29d Gender: Male Location: north QLD Posted 06/07/13 11:07 AM Author Share Posted 06/07/13 11:07 AM Finally got to take the ute for a run at the track last night since I got it retuned last november and just got lots of wheel spin with the street tyres lol. Best run I got was 12.273 @ 125.61mph with 2.189 60ft. Pretty sh*t lol. There is another meet this Friday which I'm heading out too ordered a set of 275/40/17's mt et streets last week so they should be here for that. Also got a Malwood tramp rod kit too which has made a noticeable difference to the rear end.Also thought I could live with out brembos after selling my 6pots but stock calipers with DBA T3 rotors and ferodo ds pads are just not cutting it so got on to a guy selling this setup off his GT r-spec. 1 Link to comment Share on other sites More sharing options...
southside Member Member 868 Member For: 15y 11m 18d Gender: Male Location: Radelaide.. Real Posted 09/07/13 04:34 AM Share Posted 09/07/13 04:34 AM Hey mate, what suspension/ coil over set up rear leaf springs do u Have? I'm about to lower mine with the new wheels and need it to be more stable with 450+rwkw Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now