Bonjaz Donating Members 1,841 Member For: 15y 11m 15d Gender: Male Location: CQ Posted 30/07/12 08:31 AM Share Posted 30/07/12 08:31 AM looking good, make sure that housing is ported nicely inside, dont make the same mistake I did haha 1000km round trip and a few headaches later. Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 12d Gender: Male Location: Mackay QLD Posted 30/07/12 08:41 AM Author Share Posted 30/07/12 08:41 AM It appears to have been done properly. Much larger then stock, nice round shape, no sharp edges.I dont know what a bad one is though.Doesnt have any cracks in the housing so that's good. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 3d Gender: Male Location: Vic Posted 30/07/12 09:04 AM Share Posted 30/07/12 09:04 AM I think what you are looking for is more of a D shape. Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 27d Gender: Male Posted 30/07/12 09:12 AM Share Posted 30/07/12 09:12 AM Yeh the part closest to the Shaft inline with the turbine flange should be flat otherwise the flap will stick open Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 12d Gender: Male Location: Mackay QLD Posted 30/07/12 09:21 AM Author Share Posted 30/07/12 09:21 AM I just compared it to pics from around the net and ebay and looks the same as other ported ones. Nothing hits, flapper sits flat when closed.Will be sure to test it properly when turbo is off the car. Dont want to get it all together and realise its not working. Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 12d Gender: Male Location: Mackay QLD Posted 05/03/14 06:12 AM Author Share Posted 05/03/14 06:12 AM Been ages since I been on here. Update time.Ended up getting fulltime job at the mine I was working at as temp contractor, built a house, got into motorcycles, got engaged. Through all this time the ute remained a reliable work horse. Carting furniture, 1+ tonne of dirt, besser blocks, towing a drag car.The car now has-Rapidsystems 4.5 kit (all plazmaman gear apart from intercooler)Plazmaman surge tank with 044 pumpPorted rear housing on turbo (not the above one)Xforce 4inch dump into 3.5inch system, StainlessRetuned to run 340rwkw with awesome torque (injectors near limit) and still on stock valve springs and stock ZF tune.Inside I put in 2 gauges, Autometer Cobalt in a SAAS gauge holder above the ICC. A Wideband and mechanical Boost gauge.Changed the speakers for JL Audio ones2 x 12inch Sony subs run off a Pioneer AmpNew headliningNew handbrake cover to replace my cracking oneLeather recovered centre console lidGetting close to 80,000km I decided the ute needed a birthday.New NTK O2 sensorNew genuine coilsNew genuine wheel hubs (not fitted yet)New big brake kit (not bought yet but very close)New MC Racing 20inch wheels (SImmons look without the Simmons price tag)Genuine BF GT wheel to use as a spare once bigger brakes go on 1 Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 6m 1d Gender: Male Location: Wollongong Posted 05/03/14 07:24 AM Share Posted 05/03/14 07:24 AM those wheels completely change the look of the car, it looks the goods now mate! Link to comment Share on other sites More sharing options...
gbp Member 57 Member For: 10y 8m 29d Posted 20/03/14 06:34 AM Share Posted 20/03/14 06:34 AM Really nice work on the ute mate, come up real nice. Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 4m 22d Gender: Male Posted 20/03/14 09:36 AM Share Posted 20/03/14 09:36 AM +1 on the wheels. I want to do my induction & engine bay much like yours was Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 12d Gender: Male Location: Mackay QLD Posted 17/06/14 07:00 AM Author Share Posted 17/06/14 07:00 AM Ute now has a GTX3576R on a ported .82 Rear housing. Also fitted 12psi Turbosmart actuator.Spools so quick. Hasnt been retuned yet. More on that further down.Just updated the brakes. Shockworks 4pot fronts on 355mm rotors. GT R-spec rear calipers, Ferodo pads and DBA rotors on rear.Another project im playing with on the side.Looking at an AEM water meth kit, 5 gallon tank that should fit nicely under the tray. Also have to do valvesprings, Thinking either Atomic or Crow. Then its retune. Only hoping to get 500rwhp (470ish kw). Not high power, but the smaller but stupidly fast spooling turbo will be awesome on the street. Only given it light throttle around till its tuned. Already got 1000cc KPM injectors waiting to go. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now