Rota Wheels, Who's Got Them And What Size's Ba-Bf

[MADF6]

Any black BF2 XRs/F6s with the same rota's as the FG I posted above...?

[nelsonian101]

I had some test fitting with some 18 X 9.5 +22 today on my FG.

Rears had 285/30 R888's and just touched the inside of the outer guard even with 1.75deg neg camber and a guard roll. Will test fit my 270 rear slicks with the same settings next week.

My 9.5" +35 offset street rims will be fine though (with the 285 R888's) even with less camber.

Fronts 9.5 X 18 +22 cleared easily with 250 Mich slicks with plenty of room for an R Spec 265/35 18. (Was with 3deg neg camber though)

Hoping to fit 275/35 18 Hankook Z214's grooved slicks all round as my track rims and will be test fitting late May.

[MADF6]

Damn it man... pics!

[Bellato]

Wheres best/cheapest place to buy rota's guys?

VisionR, cartel ? Looking at fairly specific offsets so the more helpful the dealer the better

[Matthew4l]

Im only new to this site, I wanna get some rota grids for my bf xr6 sedan, but I'm really not to sure what offset or size to get, my bf is lowered on coilovers it's pretty low, I will be getting my guards rolled also.

Some photos would help me out heaps !

[Henz]

Pretty sure there's a Rota thread.

Here's one

[Lee]

Hey guys I'm after help! I've got a bf typhoon and looking at the rota grid 18x8.5 fronts and the grid r 18x9.5 rears but I'm just really unsure of offsets! Don't want nothing sticking out and will roll guards if necessary! Just reading posts per hand and doing google research was thinking of +38 rear and +30 front! Will this work?

[Bellato]

Yep will work no worries

[40RDT]

Ok guys ive decided im going to get some rota grids for my BF pursuit ute, will 18x9.5 with 20 offset front and 35 offset rear fit my ute ok?

[WattsyBF]

Hey all. I have sat here and read this whole thread, so just confirming.
I've got an '05 BF XR6 Ute. I want to put Rota P45R2 wheels on in 18x9.5 +12 all round.
The ute is currently standard height but I was hoping to deal with that after I fit the wheels. Probably just 1.5" Blocks in the rear and maybe some superlows in the front.
So if I could just get this confirmed that that size will fit all round that'd be sweet! Just wasn't sure if leaf sprung rear would effect the rear sizing as a lot of the posts have been sedans!
Peace