djqc Member 291 Member For: 13y 4m 10d Posted 16/10/11 10:33 AM Share Posted 16/10/11 10:33 AM I am getting all the bolt ons and a tune from xft in PerthTurbo side 4 inch intakeNizpro big cooler kitgtx3582rwaste gate port16 psi 1000 id injectors4inch dump5 inch catstock cat back (if I can get away with it. I want it to be a sleeper)anti surge tankcooler thermostat etc...What power output will this get?What 1/4 time will I get?This is in a g6et. Link to comment Share on other sites More sharing options...
XXXRTURBO Donating Members 1,168 Member For: 17y 6m 14d Gender: Male Location: Melbourne Posted 16/10/11 11:44 AM Share Posted 16/10/11 11:44 AM depends on the dyno mate low 300rwk is wat I think I got similar mods and made 280rwk on the nizpro dyno but on any other would make more. Good luck with it at the end of the day its how it performs on the road!!! Link to comment Share on other sites More sharing options...
MexicanBatman G666E Turbo!!! Member 1,008 Member For: 15y 1m 2d Gender: Male Posted 16/10/11 01:15 PM Share Posted 16/10/11 01:15 PM Well 1/4 mile time depends on setup track conditions and much more, but I'd expect to be able to run a 10.9 if I had them mods, factor in trans tune too, this is if you run radials LSD prepped track cold night etc... Otherwise you could run into the 12'sPower wise too variable but 350rwkw? Limiting factor is the factory catback, so more boost needed for same power vs 4" exhaustI'm planing to do similar mods and having run an 11.6 so far even with my current setup I feel if optimized I can go 11.2 with current setup, so better cooler and turbo would have to help thereBut its going to be no sleeper with 16psi and a 4" intake LOL no matter how easy you go on the accelerator, it will sound awesome though Link to comment Share on other sites More sharing options...
djqc Member 291 Member For: 13y 4m 10d Posted 16/10/11 10:00 PM Author Share Posted 16/10/11 10:00 PM I was expecting that the factory cat back would be restrictive, so am willing to go with a turbo back aftermarket exhaust. I would love to get in the 10s! Will the drivability of the car improve by fitting a LSD? What's it worth to a 1/4 time?One thing that has got me stunned is, people are telling me to expect low 300-330kw with the mods I am doing. In my eyes, I'm doing everything I can possibly do without strengthening internals. But there are people running 400kw machines without cracking them open. What am I missing? Link to comment Share on other sites More sharing options...
j.d Member 1,222 Member For: 14y 6m 22d Gender: Male Location: Eastern Suburbs, Melbourne Posted 16/10/11 10:43 PM Share Posted 16/10/11 10:43 PM (edited) That's because that's when the stock turbo runs out of puff, maybe theyMissed you were upgrading!I would prob do valve springs aswell! Edited 16/10/11 10:44 PM by j.d Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 8m 23d Gender: Male Location: Melbourne Posted 17/10/11 12:47 AM Share Posted 17/10/11 12:47 AM Do the catback..Silly not to. Link to comment Share on other sites More sharing options...
djqc Member 291 Member For: 13y 4m 10d Posted 17/10/11 02:06 AM Author Share Posted 17/10/11 02:06 AM If my tuner (simon at xft) advises that the cat back will make a difference, then I will. So with the gtx3582r installed along with all the other mods mentioned, how much power should I be expecting? Link to comment Share on other sites More sharing options...
Slash Donkey Dick Member 801 Member For: 14y 10m 30d Gender: Male Posted 17/10/11 03:53 AM Share Posted 17/10/11 03:53 AM 380rwkw, 11.2 @ 128mph if you also put an LSD in it. Single spinner diff will fail hard at the track with decent power Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 10m 29d Gender: Male Location: Vic Posted 17/10/11 04:20 AM Share Posted 17/10/11 04:20 AM Stock catback, with some good valve springs I think you could push as hard as 370rwkw. Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 8m 23d Gender: Male Location: Melbourne Posted 17/10/11 05:24 AM Share Posted 17/10/11 05:24 AM Has anyone made mid to high 300's on a stock catback yet? (FG)Also didn't Rapid run mid 11's on the single spinner? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now