Dubboxr6 Member 18 Member For: 17y 14d Posted 07/12/11 07:09 AM Share Posted 07/12/11 07:09 AM I contacted coolerworx and they said that the xr8 intake is ok with their kit?. Link to comment Share on other sites More sharing options...
FAT-51X Member 254 Member For: 20y 7m 24d Gender: Male Location: Newcastle Posted 18/12/11 02:54 AM Share Posted 18/12/11 02:54 AM has anyone used the coolerworx piping with the rapid sysytems battery relocation?? my intake is going to be a bit of a mix and match affair (prefer the rapid relocation cos the battery sits at an angle) and im assuming for later on this cooler pie setup lines up with the PW stage 2 coolers?? Link to comment Share on other sites More sharing options...
neotim Member 276 Member For: 13y 10m 21d Gender: Male Location: Gold Coast Posted 18/12/11 06:17 AM Share Posted 18/12/11 06:17 AM has anyone used the coolerworx piping with the rapid sysytems battery relocation?? my intake is going to be a bit of a mix and match affair (prefer the rapid relocation cos the battery sits at an angle) and im assuming for later on this cooler pie setup lines up with the PW stage 2 coolers??I wouldn't mind knowing about this also as I think I'm gonna do a similar setup to you. I have the coolerworx piping currently but has anyone tried cutting or trying new silicon joiners to fit other piping kits to the process west stage 2 coolers?? Link to comment Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 14y 11m 11d Gender: Male Location: Muswellbrook, NSW Posted 18/12/11 08:08 AM Share Posted 18/12/11 08:08 AM Don't quote me but I think the process west runs larger diameter piping. You could run those step silicone hoses where needed.In this thread Bomber makes reference to the pipe sizes - http://www.fordxr6turbo.com/forum/topic/76602-thanks/ Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 19/12/11 01:43 AM Share Posted 19/12/11 01:43 AM (edited) has anyone used the coolerworx piping with the rapid sysytems battery relocation?? my intake is going to be a bit of a mix and match affair (prefer the rapid relocation cos the battery sits at an angle) and im assuming for later on this cooler pie setup lines up with the PW stage 2 coolers??My battery kit, I think, is similar to rapids one. Mine sits a bit higher and is very close to the hotside pipe. I know if mine was lower it would definately foul on the pipe. Edited 19/12/11 01:44 AM by STAINLESS Link to comment Share on other sites More sharing options...
FAT-51X Member 254 Member For: 20y 7m 24d Gender: Male Location: Newcastle Posted 19/12/11 02:33 AM Share Posted 19/12/11 02:33 AM Hmmmm looks like it might be touch and go.. Easy solution is to just buy the PW stage 2 kit now and keep the cooler core for later.. But unfortunately that's not gonna go well with the minister for war and finance.. Bugger.. Link to comment Share on other sites More sharing options...
FAT-51X Member 254 Member For: 20y 7m 24d Gender: Male Location: Newcastle Posted 19/12/11 02:35 AM Share Posted 19/12/11 02:35 AM Btw... VERY tidy looking setup STAINLESS.. Link to comment Share on other sites More sharing options...
FG50T Member 568 Member For: 20y 10m 19d Gender: Male Location: Melbourne Posted 19/12/11 02:50 AM Share Posted 19/12/11 02:50 AM Nice bit of kit Stainless. I've got the rapid one and it fouls on the herrod pipe only just. I took the Herrod pipe off today and theres a fair chunk of it grinded off from rubbing on the battery tray.Good thinking adding the extra bracket for the battery holder too, saves going out and buying a different one like I had to. Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 7m 6d Gender: Male Location: Melbourne Posted 19/12/11 03:14 AM Share Posted 19/12/11 03:14 AM Why doesn't anyone want to just run the PW piping? Personally I like the 3 inch straight into the throttle body idea that plaz and rapid do. Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 19/12/11 04:05 AM Share Posted 19/12/11 04:05 AM With stupid. Also puts the plumbing in a spot that gives neater finish when plumb back hose connected. Its a fat hose and needs to be pretty straight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now