Howsee Donating Members 785 Member For: 17y 2m 19d Gender: Male Location: Carindale, Brisbane Posted 06/10/11 10:59 AM Share Posted 06/10/11 10:59 AM Figured it's about time I posted up into the 300+ club.I have a FPV GS 315 sedan with the 5.0L S/C V8 and ZF, dead stock it made 396rwhp/ 295rwkw and managed a 12.81@109MPH the day after I picked it up.http://i1112.photobu...owsee/Dyno1.jpgAbout a month later I sourced a K&N Filter which raised the power up to 408rwhp/ 304rwkw, so spent roughly $125 cracking the 300rwkw mark.http://i1112.photobu...owsee/Dyno2.jpgThen about another month after that I bit the bullet and got the car tuned by Lee at RDP in Redcliffe, raised the boost up to 8psi and made a decent 492rwhp/ 367rwkw with a truckload more torque.http://i1112.photobu...owsee/Dyno3.jpgCar goes really hard now compared to standard, definately the best $1600 I've ever spent on a car. Only area that the GS is now falling behind with is the braking capacity, so will eventually be looking at putting bigger brakes onto the car.Dyno sheets are attached.CheersHowsee Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,433 Member For: 15y Gender: Male Location: Melbourne Posted 06/10/11 11:13 AM Share Posted 06/10/11 11:13 AM sounds awesomeneed pics of carhave they got exhausts for these v8's yet?? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m 1d Gender: Male Location: Probably above atmospheric pressure Posted 06/10/11 11:45 AM Share Posted 06/10/11 11:45 AM I spent $5k including tune and XCal3 to get low 300's...would love to have 3.5k to spend on brakes!Run it at the 1/4 again to complete the satisfaction. Props on running it after only having owned it a day as well hahaha! Was it new new when you boguht it? Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 11d Gender: Male Posted 06/10/11 12:24 PM Share Posted 06/10/11 12:24 PM well done howsee.. :sungum: Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 5m 2d Gender: Male Location: Victoria Posted 06/10/11 12:33 PM Share Posted 06/10/11 12:33 PM This will be my next weapon.. When I sell my investment house ;-)Nice work champ!!! Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 2m 3d Gender: Male Posted 06/10/11 05:34 PM Share Posted 06/10/11 05:34 PM Heard on the LS1forum that Mario from autotechnic in knoxfield ran a gt stock and got 296rwks. After a tune and just a tune and 2psi more they got 365rwks. Think I made a mistake ordering a new FG XR6T. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 8m 4d Gender: Male Location: Sydney Posted 06/10/11 05:43 PM Share Posted 06/10/11 05:43 PM how do they up the boost? Is it like a pulley change out or something? Link to comment Share on other sites More sharing options...
bazz Donating Members 76 Member For: 16y 11m 16d Gender: Male Location: slacks creek QLD Posted 06/10/11 08:54 PM Share Posted 06/10/11 08:54 PM awesome stuff jon....I cant wait till a few hit the 2nd hand market and I will go out and buy one Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 7m 1d Gender: Male Posted 06/10/11 09:17 PM Share Posted 06/10/11 09:17 PM I'm definitely looking at one of these for my next car.A car that can make 400rwkw with an exhaust and tune is certainly in my good books! Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 16y 17d Gender: Male Location: CQ Posted 06/10/11 11:49 PM Share Posted 06/10/11 11:49 PM (edited) awesome stuff jon....I cant wait till a few hit the 2nd hand market and I will go out and buy onemy thoughts exactly Edited 06/10/11 11:50 PM by Bonjaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now