Timmy-XR6T Silver Donating Members 179 Member For: 15y 9m 4d Gender: Male Location: Sydney, Inner South Posted 01/10/11 09:37 PM Share Posted 01/10/11 09:37 PM Hi guys - I am sure this largely will be a matter of personal preference but any guidance as to what cooler I should consider.They are all **roughly** the same size and approx the same cost from what I'm looking at with Plazmaman, Rapids, PWR but not sure the best direction to go in.Current mods on my FG are Growler CAI, 100CPSI Cat & 4" dump, 800CC injectors & tune.Also what are the limitations of the standard cooler? Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/ Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 1m 27d Gender: Male Location: Vic Posted 02/10/11 01:08 AM Share Posted 02/10/11 01:08 AM When you order from plazmaman or pwr it will generally get posted the next day. The stock coolers will make 300 but will still heatsoak bad. Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/#findComment-1145661 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 02/10/11 02:45 AM Share Posted 02/10/11 02:45 AM Something to factory in is if you want to cut up bits of your car to get the cooler to fit. If this doesn't bother you then Plaz, Rapid or PW are your best bet but if it does then your stuck with PWR unfortunately. Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/#findComment-1145672 Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 9m 24d Gender: Male Location: Victoria Posted 02/10/11 12:25 PM Share Posted 02/10/11 12:25 PM PWR is fine if you are not gonna upgrade the turbo... You'll be limited to 325/30rwkw... Or 345 on e85...If you are gonna get a bigger turbo... Process west or plazmaman are your best bet... They actually get delivered to you when you pay for them ;-) 1 Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/#findComment-1145789 Share on other sites More sharing options...
JET50T Donating Members 152 Member For: 14y 1m 27d Gender: Male Location: Castle Hill Posted 03/10/11 11:13 AM Share Posted 03/10/11 11:13 AM Ive just bought the big plazmaman cooler kit for my fg. Beautiful looking bit of gear. Ill be putting it in next weekend so ill be sure to post up lots of photos of the install. I think all the kits are essentially the same and will support pretty decent power so probably just personal preference. I was just lucky in that plazmaman gave me an awesome deal I couldn't refuse. Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/#findComment-1146089 Share on other sites More sharing options...
Garrettba03 Member 78 Member For: 13y 11m 1d Gender: Male Location: Sydney West Posted 06/10/11 02:04 AM Share Posted 06/10/11 02:04 AM (edited) Havent had experience with the pw or pwr but a mate of mine got the plazmaman kit 800hp, injectors, and cat on an fg and maxed out the turbo no problem on the dyno straight away. Fit is good and he said it was easy to install.Looks mint too Edited 06/10/11 02:06 AM by Garrettba03 Link to comment https://www.fordxr6turbo.com/forum/topic/77162-intercooler-selection/#findComment-1146726 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now