Spyathe Donating Members 872 Member For: 11y 28d Gender: Male Posted 10/07/15 11:44 PM Share Posted 10/07/15 11:44 PM Of course you did 1 Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 20d Gender: Male Location: A big bridge over a river in South Australia Posted 11/07/15 12:05 AM Share Posted 11/07/15 12:05 AM (edited) You've gota be overlooking something.Start at the beginning again, go slow and check everything --- and make sure that the cop chip is plugged back in.Oh andIf you do work it out, don't give your poor engine 20psi b4 it's tuned properly coz No. 3 could jump out :( Edited 11/07/15 12:06 AM by BenDoCo 2 Link to comment Share on other sites More sharing options...
Spyathe Donating Members 872 Member For: 11y 28d Gender: Male Posted 11/07/15 12:11 AM Share Posted 11/07/15 12:11 AM I has to be a flow issue, if the wastegate can't open the only thing that can stop the turbo from spooling till it throws a rod is either not enough air getting in or not enough air flowing through the exhaust turbine.We've eliminated the cat (it's now hollow) it's not the air filter, the cooler isn't blocked and there's no leaks.Steve mentioned that the exhaust cam timing could be stuck hence doing something with the valves but that's where my knowledge kinda stops lolGoing to check the exhaust flow this arvo and hook the boost gauge up to the turbo to see what boost its actually making Link to comment Share on other sites More sharing options...
Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 7m 3d Gender: Male Posted 11/07/15 12:11 AM Share Posted 11/07/15 12:11 AM So you checked both one way valves not the PCV? Link to comment Share on other sites More sharing options...
Spyathe Donating Members 872 Member For: 11y 28d Gender: Male Posted 11/07/15 12:13 AM Share Posted 11/07/15 12:13 AM I haven't checked those valves yet by my theory is that even if they are stuffed, due to the size of the turbo it should still be able to flow way more than those valves can and therefore make more than 6psi Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 20d Gender: Male Location: A big bridge over a river in South Australia Posted 11/07/15 12:28 AM Share Posted 11/07/15 12:28 AM surely the 'brand new' turbo wouldn't be the fault -- would it?I mean, if the bearing pack is stuffed and the thing can only spin to 20000 rpm or something like Link to comment Share on other sites More sharing options...
Spyathe Donating Members 872 Member For: 11y 28d Gender: Male Posted 11/07/15 12:34 AM Share Posted 11/07/15 12:34 AM Nah, turbo is mint. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 3m 21d Gender: Male Location: Adelaide Posted 11/07/15 01:31 AM Share Posted 11/07/15 01:31 AM (edited) Diff took another 150mls after 3-4 weeks. Peice of sh*t leaking rear hat.Throttle body was little bit dirty but now spotless. Onto plugs and coils to have a look and tighten up the hotside cooler pipe. Fun morning. After that new fuel filter then maybe a brew. Also some inox into the boost solenoid.Arron can you remember what you gapped my spark plugs to when you did the tune. Dont think simon had a play around with them. Just want to check the gap. Edited 11/07/15 01:32 AM by Bizkets is fat? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 27d Gender: Male Location: Adelaide Posted 11/07/15 04:49 AM Share Posted 11/07/15 04:49 AM 0.8 1 Link to comment Share on other sites More sharing options...
D1STRBD Member 177 Member For: 12y 6m 7d Gender: Male Posted 11/07/15 05:47 AM Share Posted 11/07/15 05:47 AM Sold to the dude with tats that crunched my bar twice haha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now