Timmy-XR6T Silver Donating Members 179 Member For: 15y 5m 16d Gender: Male Location: Sydney, Inner South Posted 27/09/11 02:30 AM Share Posted 27/09/11 02:30 AM Looking for some help guys.I'm using an SCT X3 (PN# 3000AU) on an FG XR50T 2010 with LiveLink 6.4I'm trying to manipulate some of the data logging I've done to see what PSI I'm running at various points.From what I'm told one way to calculate it is.1. Convert map_volts to PSI by "map_volts - (2.45 / .17)" 2. Convert baro_press_cal to PSI "baro_press_cal * .14504"3. Then calculate mapPSI subtract baroPSII keep coming up with weird and negative numbers so there must be something I am doing wrong - either the calculation is wrong, or I am using the wrong source values.Appreciate any advice you have. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 21d Gender: Male Location: OZ Posted 27/09/11 06:10 AM Share Posted 27/09/11 06:10 AM (edited) Lol.....talk about doing it the hard way! Log BAP under 'environment'Log MAP under 'speed density'......IircPsi = (MAP-BAP)/2.036Same method as a dyno.Edit: off boost (vacuum) will be negative! Edited 27/09/11 06:12 AM by IH8TOADS Link to comment Share on other sites More sharing options...
Timmy-XR6T Silver Donating Members 179 Member For: 15y 5m 16d Gender: Male Location: Sydney, Inner South Posted 27/09/11 06:34 AM Author Share Posted 27/09/11 06:34 AM Thanks mate - that looks a hell of allot of simpler than my original one.I'll give it a crack shortly. Thanks again. Link to comment Share on other sites More sharing options...
Timmy-XR6T Silver Donating Members 179 Member For: 15y 5m 16d Gender: Male Location: Sydney, Inner South Posted 28/09/11 09:21 PM Author Share Posted 28/09/11 09:21 PM Lol.....talk about doing it the hard way!Log BAP under 'environment'Log MAP under 'speed density'......IircPsi = (MAP-BAP)/2.036Same method as a dyno.Edit: off boost (vacuum) will be negative!hi mate - can you let me know if these are the rights values I should be logging on the xcal3Under Environment: baro_press_cal map_v Under Speed Density map_v Not sure if I am looking at the right areas because I am seeing numbers from 12-50 on acceleration - is this normal? Link to comment Share on other sites More sharing options...
Tobey Awesome... Member 407 Member For: 14y 6m 24d Gender: Male Posted 29/09/11 12:31 AM Share Posted 29/09/11 12:31 AM No, they are volts. There are two pids that say BAP and MAP. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 21d Gender: Male Location: OZ Posted 29/09/11 05:17 AM Share Posted 29/09/11 05:17 AM DMR's are in capitals. Avoid PID logging. Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 11m 18d Gender: Male Location: Sydney Posted 29/09/11 09:51 AM Share Posted 29/09/11 09:51 AM you just need an iphone (rev) or andriod (torque) apps and this http://www.ebay.com.au/itm/Auto-Car-V1-4-ELM327-OBDII-OBD2-Bluetooth-Diagnostic-/290522962386?pt=AU_Car_Parts_Accessories&hash=item43a48499d2 and you can see it right there on your phone! Plus about 30 other PIDS you can log and save and email to who ever you like! Link to comment Share on other sites More sharing options...
quadie Donating Members 720 Member For: 19y 2m 25d Gender: Male Location: Muswellbrook,NSW Posted 29/09/11 11:11 AM Share Posted 29/09/11 11:11 AM that unit will NOT work with iphone/iPod. the buletooth is not compatible ( unless its jailbroken+bluetooth stack)you need a wifi (kiwiwifi)($50-60 on ebay) to connect with iphones Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 11m 18d Gender: Male Location: Sydney Posted 29/09/11 11:58 AM Share Posted 29/09/11 11:58 AM that unit will NOT work with iphone/iPod. the buletooth is not compatible ( unless its jailbroken+bluetooth stack)you need a wifi (kiwiwifi)($50-60 on ebay) to connect with iphonesOh yeah not iphone but def works on the Andriod I use it all the time. And if it's boost you want to read then you dont need kiwi wifi, you only need kiwi wifi if you want to read AFR's. But you also have to get an extra o2 bung put into your dump!Also if your andriod has video out you can use the ASL rgb box to then run the gauges from your phone to your ICC it's ultra cool to be able to flick from over to AUX on your ICC and have any gauge combo you want displayed! Link to comment Share on other sites More sharing options...
quadie Donating Members 720 Member For: 19y 2m 25d Gender: Male Location: Muswellbrook,NSW Posted 29/09/11 12:07 PM Share Posted 29/09/11 12:07 PM yeh I livelink from my laptop and Xcal with gauges and display it on my icc , its pretty handy ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now