STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 30/05/12 12:13 PM Share Posted 30/05/12 12:13 PM (edited) ^ got pics of your car man? is that matt black in your avi?as for the light, I cant remember what else I adjusted, but with sensitivity. I had it on 1 and it worked as it should go up in revs but would not come back down untill I tapped the gas pedal again.I emailed them a vid of this in their reply they swore the sensitivity had to be on 4. I knew this wasnt going to work so I set it on 4 and made another vid to send them after making that vid I set sensitivity back to 1 and wilst driving home realised it was working perfectly.WIN! Edited 30/05/12 12:16 PM by STAINOnegger 1 Link to comment Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 15y 8m 23d Gender: Male Location: Brisbane Posted 30/05/12 12:27 PM Share Posted 30/05/12 12:27 PM I need to take some more pics. It is dark grey but it does look a lot like matt black in the photo.Maybe I should just leave it on 1 and drive around with it for a while and see if it sorts itself out.Do you have yours wired up as per the BA-BF write up? Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 30/05/12 12:36 PM Share Posted 30/05/12 12:36 PM (edited) headsex wired mine up. I supervised. sort of.there was one other calibration setting or something that had to be right, but I cant remember. will have a looksee in the manual and get back to you.oh another thing funny with mine, maybe only with mine, after I wile when adjusting sensitivity it would only let me adjust it up. so to get back to 1 I had to go up past 7.if I tried to go back down it would just exit.oh another funny thing, now I must be freaking you out, to set it to 1 I had to save it on 0. example if I saved it on 3 it would actually be on 4 when I went in to check it.have a play with sensitivity numbers, give 0, 1 and 4 a good workout. post a vid if you can and in the meantime ill work out what the other calibration setting wasalso one thing that stuffed me up for a wile, when setting the rpm range I had the first light flashing. that light actually represents 10-99,000rpm lol. so that light should not be flashing...mines now set for first light to come on at 2,500rpm and max shift (all lights flashing) at 5,250rpm Edited 30/05/12 12:42 PM by STAINOnegger 1 Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 11m 5d Gender: Male Location: Geelong, Victoria Posted 30/05/12 12:44 PM Share Posted 30/05/12 12:44 PM Any other funny things, funnynegger? Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 30/05/12 12:47 PM Share Posted 30/05/12 12:47 PM yes. another funny thing is I did all that wile hangin out the back of freakys mum 2 Link to comment Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 15y 8m 23d Gender: Male Location: Brisbane Posted 30/05/12 12:49 PM Share Posted 30/05/12 12:49 PM Looks like I have wired it up right and I just need to have a play with mine.Just out of curiousity, why do you have your RPM levels set so low. I was going to have mine go between 4800 @ 6200 Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 30/05/12 12:55 PM Share Posted 30/05/12 12:55 PM because it goes between 4800 and 6000 literally in blink of an eye... you will agree when yours is working tip topalso at 5250 because by time clutch goes in its bout to bounce off limiter... 1 Link to comment Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 15y 8m 23d Gender: Male Location: Brisbane Posted 30/05/12 01:00 PM Share Posted 30/05/12 01:00 PM Very true, I am sure I will change it a few times before I decide where I like it. 1 Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 5d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 30/05/12 01:06 PM Share Posted 30/05/12 01:06 PM ^ pretty close to what freakys mum was saying also 1 Link to comment Share on other sites More sharing options...
SPOOLAX Skids? Donating Members 975 Member For: 15y 8m 25d Gender: Male Location: Adelaide Posted 31/05/12 03:47 AM Share Posted 31/05/12 03:47 AM How can I get a loom so it can just plug and play? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now