MILES Donating Members 103 Member For: 16y 11m 13d Gender: Male Location: Townsville Posted 04/09/11 11:12 AM Share Posted 04/09/11 11:12 AM Hi, My ZF auto is on its way out, slipping through 3rd and 4th gears, does anybody know roughly how much it would cost to rebuild my ZF trans to handle my 410 rwkw, or up to around 450rwkw? And does anybody know where I could get this done? I live in Brisbane.Thanks guys. Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/ Share on other sites More sharing options...
Rhino1980 09JET Member 1,510 Member For: 15y 10m 1d Gender: Male Location: E. Maitland Posted 04/09/11 11:24 AM Share Posted 04/09/11 11:24 AM And also what they actually do to the box when they 'build' it? Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137742 Share on other sites More sharing options...
shananp Member 248 Member For: 15y 8m 10d Gender: Male Location: Werribee Posted 04/09/11 11:24 AM Share Posted 04/09/11 11:24 AM cost here in melb is $4400 which should handle upto 450rwkw.There name is kewish automotive Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137743 Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 17y 2m 10d Gender: Male Location: Sydney Posted 04/09/11 12:21 PM Share Posted 04/09/11 12:21 PM 4.4k what a rip, shouldnt be more than 3k. Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137777 Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 5m 30d Gender: Male Posted 04/09/11 07:34 PM Share Posted 04/09/11 07:34 PM RVO auto's in Dandenong $3500. Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137808 Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 5m 26d Gender: Male Location: Far north queensland Posted 04/09/11 08:45 PM Share Posted 04/09/11 08:45 PM monsta torque in W.A. would have to be the front runner at the moment, cheaper than those listed (inc freight) and have built a ZF that has so far handled 650+rwkw Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137811 Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 11m 10d Gender: Male Location: Loitering in SEQ Posted 04/09/11 11:34 PM Share Posted 04/09/11 11:34 PM I second for MTE, mines so far seen up & over 650rwkw & still in good nick. About to go & give it a proper hiding at powercruise this week. Service, price, backup & product is second to none Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137836 Share on other sites More sharing options...
Turbo6FG Silver Donating Members 497 Member For: 15y 1m 19d Gender: Male Posted 05/09/11 12:11 AM Share Posted 05/09/11 12:11 AM There's a guy on here called F6 Tornado I think who works for ZF. There's a post where he said he's taught two people to rebuid them. MTE & XFT. They are both cheaper than anyone else & have done plenty of cars. The rebuild basically involves putting more clutch discs in & sometimes a new input shaft if needed. Nizpro has actually had billet input shafts made which are slightly thicker in spots.My box was built by XFT, before that it was slipping like anything. Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137841 Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 16y 4m 13d Gender: Male Location: CQ Posted 05/09/11 01:40 AM Share Posted 05/09/11 01:40 AM HIRO F6 - said this in another thread...Greg has kindly accepted our offer to fly to Brisbane to be able to educate ourselves and the boys from 6boost on what is done to these boxes. After driving a customers F6 with a built box done by Rob at Monster Torque, I was gob smacked at how strong and responsive the box felt with over 500rwkw's going through it. I know my stock ZF at over 450rwkw's is ready to let go so the timing couldnt be better.If anyone in South East QLD is wanting to have this work carried out, feel free to get in contact with us.Cheers Greg Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1137853 Share on other sites More sharing options...
MILES Donating Members 103 Member For: 16y 11m 13d Gender: Male Location: Townsville Posted 05/09/11 11:44 AM Author Share Posted 05/09/11 11:44 AM Awesome, thanks for the help guys, is hirof6 stiill around??I got a job for ya! If not I will give monsta a ring. Link to comment https://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/#findComment-1138040 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now