Jump to content

Recommended Posts

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

KU39's on all paws. They're such a nice tyre. Quiet and smooth as. Turn in feels really good also. Happy to have matched tyres again.

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

Car was awesome again at two days of thunder at QR. People don't believe it's the smaller GTX until they see the .60 on the cover :)

So.. going to get the old man to make this for me.

post-40415-0-45715700-1434971017_thumb.j

  • Like 2
  • 2 weeks later...
  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

Ordered a genuine 12psi Garrett actuator today from MTQ. Will get it back to Profile and swap it over and going by a mates recent ZF tune Clint did, might get him to do that also.

Then really need to look at the oil pump gears I think as it's starting to worry me now. Been looking into it today and probably will just go with a gear set only unless my pump has issues once taken out. To do the whole relief and billet back plate thingy is overkill for my current application. If I did a built motor then ok, no brainer.

  • Like 1
  • I'm getten too old for this s**t
  • Bronze Donating Members
  • Member For: 12y 6d
  • Gender: Male
  • Location: A big bridge over a river in South Australia

Go the trans tune......

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

Been liking limo smooth again but...think a little firm up and get rid of the 1-2 clunk etc is worth doing a tune again.

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

I've actually still got the HTP trans tune in the xcal but don't think I can load that now with Clint's engine tune and after going back to stock it was a bit firm anyway and the downshifts were lethargic.

  • I'm getten too old for this s**t
  • Bronze Donating Members
  • Member For: 12y 6d
  • Gender: Male
  • Location: A big bridge over a river in South Australia

Been liking limo smooth again

That's what mine is ---

Don't get me wrong, I'm sure my current tuner can tune a ZF really well but if I didn't have to loose something that was pretty excellent, why should I take the chance on it and that's why I was so thankful that ratter shared the file with my current tuner coz I was so scared that I would loose my trans tune

A properly tuned trans WILL still be smooth Bomber. If I had a quiet exhaust, you wouldn't even know it changes gears (when driving normally) and boy does it change quickly.

Something to think about/talk to tuner about - if you decide to do it - is the auto shift from 2nd to 1st at low speeds.

If for example, you're doing 30kph, the trans in 2nd gear (auto) and you floor it, it will change automatically change down to 1st and sometimes, this can be very annoying.

I also love the 'always use 1st when you take off'.

I can't think of a down side actually :) yes I can........costs more money :(

Edit

I still have a bit of the 1-2 clunk/thump...preasure may be a tad toooooo hard still but don't care

Edited by BenDoCo
  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

Picked up the Garret 12psi actuator today. Will look to get it swapped over at the end of the 'turbo' season, so couple of months. Looking into the pump gears a bit more also. Might do the full Atomic race deal so brand new pump with the billet back plate etc.

  • Like 1
  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 11m 2d
  • Gender: Male
  • Location: Gold Coast

Power coated the plazmaman oil cap and battery tie down to finish of the black look in readiness for the All Ford Day at Willowbank on 19 July. Pretty happy with how the engine bay looks now :)

post-40415-0-93282600-1436264372_thumb.j

post-40415-0-79551200-1436264376_thumb.j

post-40415-0-36080900-1436264381_thumb.j

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'