Earls Turbo Line Kit

[gkors]

mine lasted a week or 2 now its f$#$king leaking oil over the turbo, coming out of the fitting or from up the line under the heat sheild

[BFHOON]

Crescent motorsport fitted my etm kit for 65 bucks. Don't forget to remove the screen from the engine side.

[arronm]

  On 27/08/2011 at 11:52 PM, 1600dave said:

What size restrictor fitting going into the turbo should be used with these? From what I've read ball bearing turbos use a 1mm restrictor, that wasn't what came with my oil line though. Or is the restriction in a different place on our cars?

The restricter is 0.8mm and its factory fitted at the oil inlet to the turbo.

[Vevapower]

Guys I'd opt for the motorsport connections version over the Earls.

http://www.mscn.com.au/scripts/prodView.asp?idproduct=631

[gkors]

  On 10/09/2011 at 10:34 PM, Vevapower said:

Guys I'd opt for the motorsport connections version over the Earls.

http://www.mscn.com.au/scripts/prodView.asp?idproduct=631

Think im going to rip this heap of sh*t out and put the original one back in for now. I've taken the filter out should be right without the filter?

[Azid]

  On 10/09/2011 at 10:53 PM, gkors said:

Think im going to rip this heap of sh*t out and put the original one back in for now. I've taken the filter out should be right without the filter?

whats the problem your having man?

[bossmang]

  On 10/09/2011 at 10:34 PM, Vevapower said:

Guys I'd opt for the motorsport connections version over the Earls.

http://www.mscn.com....p?idproduct=631

what made you chose one over the other?

[ITS 71M]

Hi I am curious y u chose that one as well

Sent from my HTC Incredible S using Tapatalk

[LOOSEBF]

Because the Earl lines are sh*t they will either melt split or just leak. I'm using there filter but got custom lines made up from hydraulink