MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 8m 10d Gender: Male Location: Wollongong Posted 25/06/12 03:23 AM Share Posted 25/06/12 03:23 AM Why don't you fab up some brackets to stiffen it back up again? Link to comment Share on other sites More sharing options...
SMURF6 Jamie Donating Members 380 Member For: 15y 11m 27d Gender: Male Location: Maroubra, Sydney, NSW Posted 25/06/12 03:29 AM Share Posted 25/06/12 03:29 AM they're there for a reason, I've seen the tub bend very easily. Not going to risk it for a dirty offset. Might revert back to stock wheels for now. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 10m 11d Gender: Male Location: Vic Posted 25/06/12 04:42 AM Share Posted 25/06/12 04:42 AM Bend the lip on the brace then put it back in. 1 Link to comment Share on other sites More sharing options...
j.d Member 1,222 Member For: 14y 6m 4d Gender: Male Location: Eastern Suburbs, Melbourne Posted 25/06/12 11:10 AM Share Posted 25/06/12 11:10 AM doesnt work, I did that but the guards flared out and brace falls out, u could re weld it but would probs I <3 Bananas paintwork, Link to comment Share on other sites More sharing options...
JET50T Donating Members 152 Member For: 13y 10m 12d Gender: Male Location: Castle Hill Posted 25/06/12 11:36 AM Share Posted 25/06/12 11:36 AM Does your front scrub smurf? I ran 19x10+15 with rolled guards on the front and it still scrubbed occasionally. I wouldnt be cutting your braces out as those quarters are already soft. If your after more room, I would be removing your inner tray liner. Using a small porto power (hyrdraulic ram) in between the brackets and possibly a oxy if it doesn't want to move cold to pump the quarters out. Can get beautiful access from the inside and watch the quarter move. As you can see below Id be happy to have a look for any Sydney siders 1 Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 8m 10d Gender: Male Location: Wollongong Posted 25/06/12 11:42 AM Share Posted 25/06/12 11:42 AM Great idea! Once ita pumped you could even tack in someSupports if your careful with a welder and cool the panel will a hose trickling orSomething on the outside 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 8m 30d Gender: Male Location: Western Sydney Posted 16/03/17 10:54 AM Share Posted 16/03/17 10:54 AM Why is it only now I find this thread? Spent a while sussing out how to best roll the rear guards when its all already here....... Anyway I've got a set of Rota P45s on order for my fg ute. Rears will sit flush with the rear guards, (18x12 +20) with 335/30r18.The Ute's pretty low (same as smurfs pics earlier in the thread) as this is where the Performance Suspension 5 link works best.As the 5 link has some lateral movement the guards will be rolled and pumped as far as can be done without farking them. As for the removal of the guard bracket, if anyone else is worried about the quarters warping Performance Suspension make a replacement bracket that is glued to the inside of the guard not the turned in lip. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now