Roo32 Member 68 Member For: 8y 1m Posted 30/12/16 09:27 AM Share Posted 30/12/16 09:27 AM Thanks mate! Will defintely need someone to do it in SA. Guessing you don't know anyone here who would know how? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,992 Member For: 16y 7m 15d Gender: Male Location: Melbourne Posted 30/12/16 09:29 AM Share Posted 30/12/16 09:29 AM any auto-elec can do 'em. or pay more for any performance shop (labour rates are generally higher) to do them Link to comment Share on other sites More sharing options...
Roo32 Member 68 Member For: 8y 1m Posted 30/12/16 09:31 AM Share Posted 30/12/16 09:31 AM Would they know in regards to the specific modifications you've mentioned? Apologies for all the questions haha Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,992 Member For: 16y 7m 15d Gender: Male Location: Melbourne Posted 30/12/16 09:36 AM Share Posted 30/12/16 09:36 AM if they're half-competent at their job, they'll figure out a way to do it without you ever needing to know what they've done (e.g it's a clean and hidden installation) 2 Link to comment Share on other sites More sharing options...
Roo32 Member 68 Member For: 8y 1m Posted 30/12/16 09:39 AM Share Posted 30/12/16 09:39 AM Haha thanks mate! Will keep sussing it out coz a fair few say they don't do it. Thanks again 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,906 Member For: 9y 9m 27d Gender: Male Location: South Australia Posted 30/12/16 10:11 AM Share Posted 30/12/16 10:11 AM Ok here are some things that will help you out. Here is a link to ICC removal http://www.fordmods.com/documents.php?d=94 Here are the various picture I have taken just now. Boost gauge connector. Looking at it from the driver's seat. Above view. Idling. Oops they fell out. Close up. Dash piece removed. Melted and tek screwed gauge pod. I should have screwed both (hehehe) cos the other one falls out occasionally. I have new ones so I should probably just fit them instead. A bit of filing for the piping and wiring. Filing from a different angle. Swarf kept for posterity. Some motivation So yeah you pretty much just stuff the boost gauge pipe through the dash and hook it up. The oil gauge needs extra fittings and wiring extended as per our pm's. 3 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,992 Member For: 16y 7m 15d Gender: Male Location: Melbourne Posted 30/12/16 10:20 AM Share Posted 30/12/16 10:20 AM that information and the discussion before it about gauges deserves it's own thread 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 30/12/16 10:44 AM Share Posted 30/12/16 10:44 AM SS inductions will have stock in the new year. SAAS are junk... Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,906 Member For: 9y 9m 27d Gender: Male Location: South Australia Posted 30/12/16 10:55 AM Share Posted 30/12/16 10:55 AM (edited) Haha sometimes junk is all you need and sometimes it's just nice to look at something going up and down if you get my drift. No punception intended. I don't need my boost gauge to be accurate, I just need it to roughly let me know what's going on. For me it's just a tuning tool and will be removed once I arrive at my final tune (if that ever happens). Same with the wideband. I had a cheap boost gauge on another car that was already installed when I bought it. Apparently the car made 2psi when it was switched off. On 12/1/2016 at 1:36 PM, Puffwagon said: You will definitely need an afr gauge for road tuning. A boost gauge is helpful in this scenario too. Those are the only two I have installed. Aside from that nothing else is necessary. Just chuck in whatever you want to keep an eye on or use nothing at all. If gauges were necessary or helpful to the average consumer then the manufacturers would have installed them from factory. Imo I'd use them for tuning or not at all. Sleeper look ftw Edited 30/12/16 10:56 AM by Puffwagon 's Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 30/12/16 11:41 AM Share Posted 30/12/16 11:41 AM You dont need to remove the ICC for gauge install, just the cluster. With a tuned car you definitely want oil pressure and boost as a minimum. The best gauges have visual and audible warnings and memory recall. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now