Jump to content

Modding Your Fg Xr6 Turbo


Dillz

  

353 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

  • Member
  • Member For: 13y 8m 4d
  • Gender: Male
  • Location: nowra

yes 270 is motor take about 50 off that ,,,and that's at the wheels on all cars ,,or there abouts ,,yes its an auto also depends on dyno some strap cars down hard ,,has a exforce exhaust from turbo back and it came with 1000 cell was about 2000 grand fitted I think maybe a little cheaper but was a few yrs ago now ,,,also can get 400 but stock motor and only looking at 300 with mods I have ,,,fast enough breaks traction ,but didn't get it to push hard just to have the extra power when needed and 300 is really drivable

Link to comment
Share on other sites

  • 4 weeks later...
  • Member
  • Member For: 11y 3m 10d

HI All,

I've just had my 2013 FG MKii XR6 Turbo Auto Tuned with a stage one tune. Firstly, before the tune I deleted the intake muffler, deleted the rear exhaust resonator and run straight out of a 31/2" dump, added pod filter with cool air box. The car has done 15,000 KMS. Stock stepped inter cooler. I was getting 243RWKW before the tune and 589 NM torque. Now with 65lbs injectors, de bung the 1000cell cat, cooler thermostat and tune with 15PSI I am getting 302RWKW and 705NM Torque. It was a hot humid day that it was on the Dyno too.

If your in WA, see Simon and Sean at Extreme Ford Tuning. They know their sh*t, that's for sure.

Link to comment
Share on other sites

  • 3 weeks later...
  • Member
  • Member For: 11y 6m 11d

Some advice if anyone would like to help.

I am purchasing an fg ute this week, its stock, and I am looking to get some goodies for it, its second hand with around 50 on the clock.

this is what im thinking

and bare with me, im not a great deal mechanically minded so if you see something out please tell me

siemens 80lb injectors

walbro gss340 fuel pump

plazmaman 4" cold air intake setup (is a battery relocation necessary with a cold air intake system?)

high flow cat

flash tune

intercooler kit (I was looking at the HDI hybrid gt2, there are some good reviews on it and its good for 600hp, any advice on this would be great)

one issue, is the clutch going to be good for the power this will produce? in my last fg it had roughly 315rwkw and the clutch was slipping first drive after the mods were done?

thanks for the help

Edited by MFR31
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'