Grovsta Member 34 Member For: 12y 10m 10d Posted 28/04/12 06:33 PM Share Posted 28/04/12 06:33 PM Had my 09 fg turbo ute custom tune only and it made 282.9rwkw 840 nm of torque on 16psi ,Had tune done by Bullet Performance racing in Geelong . Was really stoked with such high torque from tune only ,would have made more but still only got the standard actuator.boost tapered back to 13 psi at high rpm . What psi actuator should I go to running 16 psi max mostly use 14psi tune for everyday driving. So next mods to come are actuator, injectors,fuel pump for starters. Awsome thread everyone 2 Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 15d Gender: Male Posted 28/04/12 10:54 PM Share Posted 28/04/12 10:54 PM Stick with the mode you've listed and add a high flow cat. Search for venom cats on ebay. The ones for fg are bolt in so you can do it yourself. With that combo you'll make 300kw but then you'll have to start looking at your cooler and piping. Link to comment Share on other sites More sharing options...
Ideal83 Member 2 Member For: 12y 6m 7d Posted 02/05/12 11:00 AM Share Posted 02/05/12 11:00 AM hi I have just purchased a 08 fg turbo ute. Its stock and I want to mod it. could anyone point me in the right direction as to a workshop who could do injectors cat and tune possibly a cooler in melbourne apart from nizpro.I know they are prob one of the best but also the dearest. I also know you pay for what you get so id like to compare and have a look at what my options are.What kind of power figures could I excpect and what will it roughly cost?..I would be chasing 320 - 360 rwk even if its on e85.honest opinions would be greatcheers bill Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 8m 12d Gender: Male Location: Geelong, Victoria Posted 02/05/12 11:11 AM Share Posted 02/05/12 11:11 AM Direct you right over to PitLane Performance, site sponsor and never ever heard a bad report from there. One you can trust and plenty of people off here been there and had work done Price, best to either ring them up or PM Mick (username: ratter)Good luck bud and keep us posted on what you decide to go with in terms of mods Link to comment Share on other sites More sharing options...
Ideal83 Member 2 Member For: 12y 6m 7d Posted 02/05/12 08:16 PM Share Posted 02/05/12 08:16 PM Thanks for your response shyfrd. I'll give them a ring. I'll keep you posted.Cheers Link to comment Share on other sites More sharing options...
Clay14 Member 18 Member For: 13y 3m 11d Posted 15/06/12 12:16 AM Share Posted 15/06/12 12:16 AM Hey guys iv spoken to a few tuners about my mk11 fg xr6t ute only mods so far are 4 inch cat back exhaust from x force there saying they will have trouple tuning it with a 4 inch dump and hi flow cat because the 4 inch exhaust flows so well? and the standard turbo needs to be modded to control the boost with the 4 inch exhausts. just wondering if anyone has used this exhaust with unmodded turbo and what power they have achieved? I was after injectors and tune with nex cooler piping but there saying it will be hard to get the low down boost. just a bit confused would be great to hear from someone with same exhaust and see what power they made thanks heaps Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 15d Gender: Male Posted 15/06/12 02:07 AM Share Posted 15/06/12 02:07 AM Ask them if keeping the standard dump pipe and just upgrading the cat will help? Other wise you'll have to port the turbo. 1 Link to comment Share on other sites More sharing options...
Clay14 Member 18 Member For: 13y 3m 11d Posted 15/06/12 03:01 AM Share Posted 15/06/12 03:01 AM Iv found a good tuner that wants to tune it with standard dump and standard cat but I wanted the bigger dump pipe for better sound doyou think I will get better and louder exhaust note with the big dump pipe and high flow cat? thanks Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 15d Gender: Male Posted 15/06/12 03:08 AM Share Posted 15/06/12 03:08 AM You'll definitely get a better not out of it with a higher flowing dump and cat but it won't be too much different to what yo have now.Dump pipe doesn't matter so much but the gains you get out of a high flow cat with a tune are well worth it.http://www.ebay.com.au/itm/Ford-Falcon-FG-XR6-F6-G6E-Turbo-High-Flow-Cat-Pipe-FPV-/260820790872?pt=AU_Car_Parts_Accessories&hash=item3cba216e58 1 Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 8m 12d Gender: Male Location: Geelong, Victoria Posted 15/06/12 03:13 AM Share Posted 15/06/12 03:13 AM Get a screamer pipe..fark yeah!!! Hahah 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now