Full Pacemaker Exhaust

[tuk]

hi all, just saw Full Pacemaker Exhaust fully installed for $1000 just wondering if anyone had this installed or heard it on a stock g6e turbo?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170613519730&ssPageName=ADME:X:RTQ:AU:1123

[Vevapower]

Anyone that quotes you headers back on a Turbo car I'd be a little concerned!

Edited 12/06/11 10:37 PM by RHR
No need to quote above post. USE FAST OR ADD REPLY

[k31th]

As per above, that exhaust is clearly not a Turbo exhaust, it is only for a naturally aspirated car. Judging by the picture, it is for a naturally aspirated V8. Its not relevant to any of our inline 6's or our turbo's. So this is not going to be relevant to any Ford/FPV manufactured FG model except the XR8's/GT's or a car that was optioned to include a V8. That aside, I believe that picture is for a Expensive Daewoo V8 (I could be wrong on this).

If you're looking for a full stainless Turbo exhaust, you're looking at Turbo-back for a lot more than the $1020 here. That's without an exhaust manifold etc etc required for an "entire" exhaust from "headers-to-tip" for a Turbo.

[tuk]

thanks for the reply, I did notice the picture was for a v8 but it did say pic is illustration only

since I know nothing about parts ill stick with the stocks just to be on the safe side

Edited 12/06/11 10:29 PM by tuk

[k31th]

Not a problem. If you need more advice on anything relating to these cars, search first then ask as there are tons of helpful and knowledgeable people here. And welcome to fordxr6turbo.com

[Dagabond]

There's also a topic on this exact system and link already in the exhaust section of the site....

(Where this thread is now....after I moved it from the G6E Turbo section...)