qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 30/01/12 10:00 AM Author Share Posted 30/01/12 10:00 AM come on reece pull ya finger out & make it happen!!!We're at abit of a stand still at the moment but it's all gonna happen soon, I still want my 1000 plus but I think its time to race it first!!! Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 13/02/12 12:24 PM Author Share Posted 13/02/12 12:24 PM Time for some more DLM awesomeness Pics & stories to come in the next month or so Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 7d Gender: Male Location: Far north queensland Posted 13/02/12 09:30 PM Share Posted 13/02/12 09:30 PM Kent we were thinking of pulling it out to put 14mm studs in, o'ring the block & copper gasket but its such minor damage & we know what happened so hopefully its a simple fix so can't justify taking it off the road again for a period of time again, it needs to be used!!!Time for some more DLM awesomeness Pics & stories to come in the next month or soI love your version of a simple fix and getting the car on the road quickly. You and the Zohan are crazy, I like it a lot Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 13/02/12 10:48 PM Author Share Posted 13/02/12 10:48 PM We haven't had to pull the engine out to fix her up luckily that & we sought of decided this car needs to be back together as its spent way too much stationary & not enough time being used & abused. Whilst we're still using the zf we can't utilise all the power anyway so high boost levels at the track aren't necassary so the risk is relitively low of this happening again so we're sticking to the 12mm studs for now.My intentions & hope is next time im home to have it ready & take it to the strip at a reasonable power level. I want to try & find a balance of still being able to launch it with an exceptable 60ftr, get past that point without breaking something or being too laggy & then come home strong with a good mph. I know this is what we all hope to do but the equasion isn't as simple as it looks because im goin back to the stock diff gears to try & regain better driveability & also while at the track try & limit as much time as possible in the cruise gears (5th-6th) as this where the real breakages will start. Theres always a balance & anyone can go to the track & try & run a time with no thought to the before & after but I expect & want more out of this car not just a one show pony. .I got sent some pics that I though might be worth sharing.Its still got the gtx on it in this photo but I think we're gonna so the same to the precision as I like the clean look Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 4m 26d Gender: Male Location: Wee Waa/NSW Posted 14/02/12 08:54 AM Share Posted 14/02/12 08:54 AM sh*t box lolThe shot with the T/B looks sweet Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 14/02/12 08:58 AM Author Share Posted 14/02/12 08:58 AM yeah piece of sh!t but yeah one of my favourite shots Link to comment Share on other sites More sharing options...
XYZ Donating Members 1,171 Member For: 15y 3m 16d Posted 14/02/12 10:35 AM Share Posted 14/02/12 10:35 AM Hey mate,What 12mm studs are you going to use this time? Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 9m 18d Gender: Male Location: W.A Posted 14/02/12 10:56 AM Share Posted 14/02/12 10:56 AM We haven't had to pull the engine out to fix her up luckily that & we sought of decided this car needs to be back together as its spent way too much stationary & not enough time being used & abused. Whilst we're still using the zf we can't utilise all the power anyway so high boost levels at the track aren't necassary so the risk is relitively low of this happening again so we're sticking to the 12mm studs for now.My intentions & hope is next time im home to have it ready & take it to the strip at a reasonable power level. I want to try & find a balance of still being able to launch it with an exceptable 60ftr, get past that point without breaking something or being too laggy & then come home strong with a good mph. I know this is what we all hope to do but the equasion isn't as simple as it looks because im goin back to the stock diff gears to try & regain better driveability & also while at the track try & limit as much time as possible in the cruise gears (5th-6th) as this where the real breakages will start. Theres always a balance & anyone can go to the track & try & run a time with no thought to the before & after but I expect & want more out of this car not just a one show pony. .you wont get to 5th and 6th down the 1/4 mate unless you're talking about track not strip? Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 14/02/12 11:22 AM Author Share Posted 14/02/12 11:22 AM you wont get to 5th and 6th down the 1/4 mate unless you're talking about track not strip?that's the hope with changing the diff gears back to std. ive got the 3.9's in there at the moment so pretty useless for racing & not so road friendly either. Tryin to overtake is a careful procedure at the moment Pm sent Ben (xyz) Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 22d Gender: Male Location: Loitering in SEQ Posted 15/02/12 10:43 AM Author Share Posted 15/02/12 10:43 AM We haven't had to pull the engine out to fix her up luckily that & we sought of decided this car needs to be back together as its spent way too much stationary & not enough time being used & abused. Whilst we're still using the zf we can't utilise all the power anyway so high boost levels at the track aren't necassary so the risk is relitively low of this happening again so we're sticking to the 12mm studs for now.My intentions & hope is next time im home to have it ready & take it to the strip at a reasonable power level. I want to try & find a balance of still being able to launch it with an exceptable 60ftr, get past that point without breaking something or being too laggy & then come home strong with a good mph. I know this is what we all hope to do but the equasion isn't as simple as it looks because im goin back to the stock diff gears to try & regain better driveability & also while at the track try & limit as much time as possible in the cruise gears (5th-6th) as this where the real breakages will start. Theres always a balance & anyone can go to the track & try & run a time with no thought to the before & after but I expect & want more out of this car not just a one show pony. .Please disregard above comments as stupidity yet commonsense in the same movement has preveiled. Look foward to some new additions under the bonnet of Jet after the engine gets back from a little holiday down at Atomic for some new presents. Should ban mobile phones way to easy to get ahold of me & twist my arm. It's gonna be bigger, badder & faster than ever & did I mention pretty 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now