XYZ Donating Members 1,171 Member For: 15y 2m 8d Posted 10/01/12 07:43 AM Share Posted 10/01/12 07:43 AM yeah nice one ^^. go with the arp's jon. my 26 is torqued up to 105 ft/lb and no dramas they are tough and used for mega tough builds. they also have plenty more space for higher torque.I think John's gasket could have been farked from last time, as the new atomic ones he put in are torqued to 115 ft/lb.. (I think)... Typhoon freak has these in his as well and I don't believe he has been having any problems.. Keen to he what peoples opinions are as I still need to put new ones in mine after pushing a little water on 31psi.. Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 6m 14d Gender: Male Location: Loitering in SEQ Posted 10/01/12 08:05 AM Author Share Posted 10/01/12 08:05 AM We lifted the head with the arp ones and put them down to 105 & didnt have a problem after up to 31psi. We put it up to 34psi with the old turbo which made 998rwhp & it was fine with the new studs. Chances are the new turbo is alot more efficient & just abit much for it all. The new studs are down to 120 so wasnt expecting there to be problems but chances are we did damage to the gasket ages ago & with the combination on things it just went wrong on the day Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 6m 14d Gender: Male Location: Loitering in SEQ Posted 10/01/12 12:47 PM Author Share Posted 10/01/12 12:47 PM Watch this thread might be some more to it very soon!!! Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 9m 14d Gender: Male Location: Sydney Posted 10/01/12 12:55 PM Share Posted 10/01/12 12:55 PM Project 2200 perhaps??? Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 6m 14d Gender: Male Location: Loitering in SEQ Posted 11/01/12 02:12 AM Author Share Posted 11/01/12 02:12 AM haha not that silly, Just started a multi year contract in the pilbara so no doubt this wont be its last guise Link to comment Share on other sites More sharing options...
Xtreme F6 Team Xtreme Donating Members 1,680 Member For: 19y 9m 17d Gender: Male Location: Perth Posted 13/01/12 03:16 PM Share Posted 13/01/12 03:16 PM (edited) Damn mate that's tragic when that happens. Your in an area that few people dare to walk with these engines and fewer succeed to do so without issues like this. I have been testing head studs and gaskets for ages and have had the best results so far with the current setup but even with what I have atm I still can get a couple of dribbles come out of the overflow line on 37 and 38 psi. You dont even need to be out by any small amount on any of the tune settings and it can still do this. Not forgiving at all and the first thing that loves to let you know when your pushing to hard is the cylinder head gasket. I got some custom ARP head studs out of the USA for mine (9/16)and they have so far put up with some huge and stupid amount of tests and punishment and 100's of dyno runs. Now they are finally starting to show signs of fatigue with repeated big boost pulls.People so dont understand how much money and heart ache that guys like yourself and me and Spiko and Kyle and other put into trying to get these huge power figures from an engine that only gets it development from this country and doesnt have the USA or other countrys helping to develop products past what we are pushing them to. I mean we may get parts made elsewhere but not under the programs of development that other engines have had.Your car is one nice looking machine so hopefully you get it sorted soon and start to chomp up the black stuff again!Simon XFT Edited 13/01/12 03:18 PM by Xtreme F6 1 Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 3m 18d Gender: Male Location: Wee Waa/NSW Posted 14/01/12 01:46 AM Share Posted 14/01/12 01:46 AM that's what I run and o ring with copper gasket . @35 psi its will do the same as yours davo Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 26d Gender: Male Posted 14/01/12 06:30 AM Share Posted 14/01/12 06:30 AM So what torque settings do you guy use on the head studs. Link to comment Share on other sites More sharing options...
stee3 Member 194 Member For: 13y 5m Posted 14/01/12 09:56 AM Share Posted 14/01/12 09:56 AM So what torque settings do you guy use on the head studs.I have the 14.3mm head stud in mine and I have them torqued to 125ftb.Sorry to hear about the head gasket! What head gasket do you have in your motor Im using the Cometic gasket had to modify it to get it to pass the head studs. I hope it all holds Link to comment Share on other sites More sharing options...
nxr06 Donating Members 117 Member For: 20y 6m 29d Posted 17/01/12 08:47 PM Share Posted 17/01/12 08:47 PM Where do you get descent tail shafts to handle this sort of torque? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now