qik1 Silver Donating Members 2,720 Member For: 16y 7m 27d Gender: Male Location: Loitering in SEQ Posted 06/08/12 01:13 PM Share Posted 06/08/12 01:13 PM I run an atomic flexplate & have done for a few years. With our latest engine we had it doweled, loctited & then welded those fckers arent gonna come loose not that they did anyway in the past 1 Link to comment Share on other sites More sharing options...
stee3 Member 194 Member For: 13y 6m 13d Posted 06/08/12 01:34 PM Share Posted 06/08/12 01:34 PM (edited) I run an atomic flexplate & have done for a few years. With our latest engine we had it doweled, loctited & then welded those fckers arent gonna come loose not that they did anyway in the pastthat's the sh*t! Edited 06/08/12 01:34 PM by stee3 Link to comment Share on other sites More sharing options...
PookeyMaster Donating Members 1,531 Member For: 14y 19d Gender: Male Location: Parramatta, NSW Posted 07/08/12 08:59 AM Share Posted 07/08/12 08:59 AM Its just a little BA you wouldnt have seen it around, what was suppost 3 months to build ended up over 12 months.. I should be out and about in a week or 2 if I see you around ill come and say hi to you. After looking at your vidoe are you having trouble building boost on the trans brake? Is your throttle body shutting? You have one really fast car keep up the good work.Bahaha, that's not just a little car mate. It would have to be a damn weapon unless it hasn't been tuned...How much is it making or hasn't the build finished yet? Link to comment Share on other sites More sharing options...
AtomiCg6 Donating Members 197 Member For: 13y 8m 24d Posted 27/08/12 08:09 AM Author Share Posted 27/08/12 08:09 AM Heyy guys just wondering if anyone who has a 2 or 3 speed, has had there bolts come loose on there converter b4? cheers johnny Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 5m Gender: Male Location: Wee Waa/NSW Posted 13/09/12 10:19 AM Share Posted 13/09/12 10:19 AM How the car going mate Link to comment Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 6m 2d Posted 13/09/12 10:34 PM Share Posted 13/09/12 10:34 PM I have had mine come loose. tack weld em!!! I got a atomic flex plate too as the standard one is pretty piss weak Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 7m 14d Gender: Male Posted 13/09/12 11:20 PM Share Posted 13/09/12 11:20 PM I had to tack weld mine in the 4spd too as they came loose. I'm still running the standard flex plate as I don't make any power. Link to comment Share on other sites More sharing options...
AtomiCg6 Donating Members 197 Member For: 13y 8m 24d Posted 14/09/12 09:18 AM Author Share Posted 14/09/12 09:18 AM heyy guys story is, converter bolts come loose again, and somehow snapped the dowell from the converter itself, which ive had replaced with a bigger stall now, further investigation shows abit of damage to the belt around the balancer andthe balancer being flogged out only after 5000kms, which was causing massive vibrations.. So brad has Kindly replaced it with a new re enforced 1, which is getting installed atm, no damage was done to the flexplate this time, so hopefully the new balancer will fix all problems Also the guy that writes up the programs from herrod, is making me a something so it doesnt read the automatic tranny anymore, which was causing alot of faults with the car running well.. shouldnt be to far off now I hope Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 7d Gender: Male Location: Adelaide Posted 14/09/12 11:58 AM Share Posted 14/09/12 11:58 AM Martin donnon ( herrods bloke ) is a wizz if he cant do it literally no one can Link to comment Share on other sites More sharing options...
stee3 Member 194 Member For: 13y 6m 13d Posted 17/09/12 03:58 AM Share Posted 17/09/12 03:58 AM (edited) heyy guys story is, converter bolts come loose again, and somehow snapped the dowell from the converter itself, which ive had replaced with a bigger stall now, further investigation shows abit of damage to the belt around the balancer andthe balancer being flogged out only after 5000kms, which was causing massive vibrations.. So brad has Kindly replaced it with a new re enforced 1, which is getting installed atm,no damage was done to the flexplate this time, so hopefully the new balancer will fix all problems Also the guy that writes up the programs from herrod, is making me a something so it doesnt read the automatic tranny anymore, which was causing alot of faults with the car running well.. shouldnt be to far off now I hope Man you are having the same luck as me everything that could go wrong has gone wrong at some stage. What a pain in the bum this car has become this week my new auto started leaking after driving it 2 km! The bolts that hold the bell housing and the pump in sheared the thread out from inside the casing, Who built your converter dude? TCE? Are you using Lock Tight and the bolt Atomic provided with the flexplate? Hope you sorted man it must be very frustrating. Edited 17/09/12 04:06 AM by stee3 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now