F6_Charlie Donating Members 1,001 Member For: 20y 2m 29d Gender: Male Posted 14/05/09 11:43 PM Share Posted 14/05/09 11:43 PM Well Charlie is fitting one of these to his F6 Tornado and it currently has 375rwkw.Would be good to see what he gets.It looks so good though that its a shame to hide it under the car.Yeah kinda hanging to get it on the ute and see what differents it makes.It does look good almost makes me wanna raise the ute, so the 1st speed bump I come across doesnt kill it Link to comment Share on other sites More sharing options...
LUMO Donating Members 476 Member For: 17y 9m 14d Gender: Male Location: SYDNEY Posted 16/05/09 12:25 AM Share Posted 16/05/09 12:25 AM Dyno result with with one on a 600rwkw car??? There are alot of 4 inch systems already out for sale and have been out for a few years now and they look almost the similar if not same as this one just with out the twin cat and with out the v bands.. Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 3d Gender: Male Location: Victoria Posted 16/05/09 01:06 AM Share Posted 16/05/09 01:06 AM Your point? Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 21y 11m 4d Gender: Male Location: Sydney Posted 16/05/09 01:44 AM Share Posted 16/05/09 01:44 AM Technically you almost certainly wouldn't bolt that exhaust (as is) onto a 600rwkw car, as you would almost certainly be using a much larger turbo than stock, an external wastgate, and so a variation on the dump would be required.However, the pertinent point, as Simon found with testing my 1000HP motor some 4 years ago, was ensuring that the muffler backpressure was minimised.Back in 2004 I started with a full 4" exhaust, and the original mufflers I was using (sourced in Sydney) were found to be deficient and causing excessive backpressure at high power levels. Some custom mufflers were developed for a vastly improved result. I was also running dual outlet pipes (twin setup), and when the car was back in Sydney I changed to a single muffler outlet for a better result.So I would expect that stating a nominal 600rwkw support level would very much take into account the muffler design, size, and backpressure characteristics required from previous R&D. Mufflers that may well work well at say 350-500rwkw may well not be suitable for a 600rwkw application.Brian Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 10d Gender: Male Location: Broady, Melbourne Posted 16/05/09 02:15 AM Share Posted 16/05/09 02:15 AM (edited) You bring up a good point Brian. Who needs a 4 inch system for stock turbo? The way I see it there are cheaper alternatives for the stock turbo that are twin 2.5 or single 3.5 inch systems. I don't quite understand having to buy a 4 inch system with a dump pipe suited to a turbo setup that will max out at 400ishrwkw. That's only using about 66% of the systems flow. If you could buy this system minus the dump, that would be a winner for everyone and I would certainly consider it for my impending build. I am getting a custom dump made so I'd be throwing away 3 or 4 hundred dollars buying this system.you would think nizpro would invest in a mandrel bender and make all the sections in single pieces "looks good"A mandrel bender that can handle 4 inch pipe will burn a hold in the National budget mate. Not cheap at all. Edited 16/05/09 02:27 AM by straughsberry Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 1d Gender: Male Location: @ my laptop Posted 16/05/09 04:48 AM Author Share Posted 16/05/09 04:48 AM you would think nizpro would invest in a mandrel bender and make all the sections in single pieces "looks good"Nizpro supply products that are designed to work, looks come second as far as prorities go, Do you guys have a 4" mandrel bender in your exhaust shop? Link to comment Share on other sites More sharing options...
ebxmple Member 1,322 Member For: 16y 9m 29d Posted 16/05/09 07:50 AM Share Posted 16/05/09 07:50 AM I guess it will always will be there for the future with possibly a custom dump needed if changing turbo but that wont be happening for me anytime soon. May be a bit of overkill for us standard turbo boys but hey,its done and done once with only a minor change needed if changing turbo. Cant wait to see these start going on cars to here results as they will be what says all. Same things happened when their cooler came out but after a while people started seeing the results and started to change minds. Link to comment Share on other sites More sharing options...
Paul@eliteauto Member 843 Member For: 18y 2m 28d Gender: Male Location: Brisbane Posted 03/07/09 09:13 AM Share Posted 03/07/09 09:13 AM Well after a wait that has been very painfull , its here its on and its worth every heart breaking moment!Last dyno day theFG ran 325 at the wheel and hasnt been touched since. Ran 11.77 with Boges at the wheel so it want a slouch.Fitted the system and put it on the dyno and 348 all day. touched up the tune to control boost a little better but it really needs the cooler kit.The cooler is here but waiting on some proto type pipes.Boges is taking it to the drags tomorrow so hopefully he can pedal it done the track for some record run.Thanks Nizpro.Cheers Paul Link to comment Share on other sites More sharing options...
eicarsto Member 31 Member For: 15y 5m 24d Gender: Male Location: Brisbane Posted 03/07/09 09:22 AM Share Posted 03/07/09 09:22 AM Awesome news Paul.I have been waiting for the Nizpro exhaust to come in.Do you have pics? and how much to get done on my FG? Link to comment Share on other sites More sharing options...
Paul@eliteauto Member 843 Member For: 18y 2m 28d Gender: Male Location: Brisbane Posted 03/07/09 09:45 AM Share Posted 03/07/09 09:45 AM Price will just over $2300 with freight fitted.Well worth it.Cheers Paul Link to comment Share on other sites More sharing options...
Recommended Posts