matt47569 Member 39 Member For: 15y 1m 28d Posted 08/05/11 03:01 PM Author Share Posted 08/05/11 03:01 PM (edited) yeah too quiet though haha hmmm I see doesnt look I'll be modifying it as tempting as it is then if the turbine and flapper are not seperated in the housingwater/meth is great! picked up 10rwkw up top straight off the bat without tuning, and when tuned had a bit more up top and around 30rwkw more through almost all the entire rev range when boost comes on. good piece of kit Edited 08/05/11 03:03 PM by matt47569 Link to comment Share on other sites More sharing options...
SPOOLAX Skids? Donating Members 975 Member For: 15y 8m 4d Gender: Male Location: Adelaide Posted 09/05/11 08:54 AM Share Posted 09/05/11 08:54 AM Do it Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 14y 2d Posted 30/07/11 08:29 AM Share Posted 30/07/11 08:29 AM With the flapper, how far does it actually open?Say 90 degrees? 45?Reason being, I have a turbo with a larger flapper valve and an Xforce split dump. With the actuator rod disconnected and opening it by hand, it flapper will foul thedump pipe, but I'm not sure the actuator opens it that far?Also, where do I get a gasket that includes the middle section to seal between turbine and the gate side?My turbo's had the middle section welded and machined flat, and split dump had the crappy separator section cut off. Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 11m 23d Posted 30/07/11 01:26 PM Share Posted 30/07/11 01:26 PM As above^^^ Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 11m 23d Posted 01/08/11 12:11 PM Share Posted 01/08/11 12:11 PM Pretty sure mine hits my split dump also!! Link to comment Share on other sites More sharing options...
.BLKPHN. Bronze Donating Members 283 Member For: 13y 10m 20d Gender: Male Posted 02/08/11 02:19 AM Share Posted 02/08/11 02:19 AM just go pay and get your turbo gated??then it will be an actual screamer Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 14y 2d Posted 02/08/11 07:49 AM Share Posted 02/08/11 07:49 AM Or in that case get a proper manifold and turbo if you want it 'proper'Anyway know how far it opens and if a suitable gasket is available? Link to comment Share on other sites More sharing options...
AtomiCg6 Donating Members 197 Member For: 13y 8m 29d Posted 02/08/11 04:19 PM Share Posted 02/08/11 04:19 PM hey bud, I think just get the turbo system moded aswell, Youll get a heap more power, and they sound pretty good with a good intake system... cost u about $1200 roughly cheers johnny Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now