LazyBrennan Donating Members 683 Member For: 13y 9m 2d Gender: Male Location: Baldivis, Wait Ages. Posted 04/05/11 11:44 PM Share Posted 04/05/11 11:44 PM Hi guysGetting some RDA slotted rotors in the next 2 weeks for a nice price of 200 for the pair. Yes they are 322mm. I just wanted to know whats the best pads to go with them? I dont do any track work and I only go down the quarter mile every now and then. Other then that its just normal weekend driving and driving to work every day. The car is a 07 bf mk2 xr6 turbo. I was thinking bendix ct's but was told from someone that ct's wear the rotor pretty fast. Is this true or not? Link to comment Share on other sites More sharing options...
notol Team Octane Donating Members 209 Member For: 16y 24d Gender: Male Location: Innisfail Nth Qld Posted 05/05/11 10:52 PM Share Posted 05/05/11 10:52 PM Hey mate.I'm not sure which pads would be the perfect match, but I myself have RDA Gold Passivated Rotors with QFM A1RM pads. However, the pads after around 30,000kms, have worn about 3-4mm off the rotor, which I was kind of expecting due to their specs and how well they performed. Machining them will pretty much remove the dimples and slots they have, so I will just replace them. No track work, just spirited driving I am going to replace and downgrade the pads to QFM HPX pads in the next month (They are equivalent to Bendix Ultimate's)which should hopefully give me a bit better life from the RDA's albeit with less braking power... So yeah, for braking performance I would without a doubt recommend the QFM A1RM's (Awesome awesome braking power) but I would suspect the HPX pads would be better suited for an overall compromise between longevity, performance and price, for the both of us.I'm sure there are other people on here with a better idea about what to pair them up with, but from the research and talks I've had with the RDA guys, they should match pretty good.Let us know what you end up going with and your opinion of them after a bit of use.Take it easy fella. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m Gender: Male Location: Perth Posted 05/05/11 11:12 PM Share Posted 05/05/11 11:12 PM (edited) Give Greg at GSL Rally Sport a call, they have switch from QFM's to Remsa pads and has had pretty good reports from them. Im going too use these on with 355mm DBa 4000's.I previously ran QFM's and they are a good pad but as Notol mentioned they will eat The softer RDA rotors. The Remsa are recommend for softer rotors Edited 07/05/11 01:15 AM by hiddeous I phucked uo..... Link to comment Share on other sites More sharing options...
alpha Member 266 Member For: 17y 9m 20d Gender: Male Location: Perth Posted 06/05/11 02:03 PM Share Posted 06/05/11 02:03 PM (edited) I'm in the same boat, but have purchased DBA's. I don't think Matt from Race Brake Sydney stock Resma pads as I too asked. I'm leaning towards Hawk pads as recommended by Race Brake. I cannot find any short term availability of QFM (HPX) pads for FPV (even from QFM).Hey Hiddeous..have you installed your Remsa's yet. Interested in your feedback Edited 06/05/11 02:05 PM by alpha Link to comment Share on other sites More sharing options...
bradles024 Donating Members 1,145 Member For: 15y 1m 9d Gender: Male Posted 06/05/11 02:11 PM Share Posted 06/05/11 02:11 PM I have RDA rotors with EBC Redstuff pads, and they have fantastic stopping power. Have lasted a fair while now too. Link to comment Share on other sites More sharing options...
LazyBrennan Donating Members 683 Member For: 13y 9m 2d Gender: Male Location: Baldivis, Wait Ages. Posted 06/05/11 11:50 PM Author Share Posted 06/05/11 11:50 PM Thanks for the replies guys. Ill look into getting some QFM HPX pads with the slotted rda rotors. I was going to try bendix ultimates but have heard there noisy as **** Can any one tell me if the QFM HPX are noisy? Or if they will chew up my rda's quickly? Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 12d Gender: Male Location: Sydney Posted 07/05/11 01:07 AM Share Posted 07/05/11 01:07 AM I've gone the new DBA4000's T3 slots with Project MU NS pads and I'm really happy withthe combo, the inital bite is amazing! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m Gender: Male Location: Perth Posted 07/05/11 01:20 AM Share Posted 07/05/11 01:20 AM I'm in the same boat, but have purchased DBA's. I don't think Matt from Race Brake Sydney stock Resma pads as I too asked. I'm leaning towards Hawk pads as recommended by Race Brake. I cannot find any short term availability of QFM (HPX) pads for FPV (even from QFM).Hey Hiddeous..have you installed your Remsa'sSorry mate, I made a mistake, I got the Pads from Greg at GSL Rally Sport, Got my brake lines from Matt @ Race Brake Will be fitting the Remsa´s on worn Brembo rotor today and hope to have the car on the road next week. So will report back in a couple of weeks.I plan to run out the rotors I have now on the Remsa then run a new set when I change to the New DBA 4000´s. So my initial impressions may not be an accurate compared to new pads on new rotors.The pads are only $109 a pair so at that price im happy too burn up a set on a set of rotor that only have aprox 30% life left Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m Gender: Male Location: Perth Posted 07/05/11 01:22 AM Share Posted 07/05/11 01:22 AM Thanks for the replies guys. Ill look into getting some QFM HPX pads with the slotted rda rotors. I was going to try bendix ultimates but have heard there noisy as **** Can any one tell me if the QFM HPX are noisy? Or if they will chew up my rda's quickly?If you can find QFM´s grab a set, I wouldn't recommend Bendix pads, bulk dust and they are rotor rooters. Link to comment Share on other sites More sharing options...
alpha Member 266 Member For: 17y 9m 20d Gender: Male Location: Perth Posted 07/05/11 01:50 AM Share Posted 07/05/11 01:50 AM I've gone the new DBA4000's T3 slots with Project MU NS pads and I'm really happy withthe combo, the inital bite is amazing!Bugger if I knew these were available I would have got those T3..I bought a pair of the slotted 4000 (6x6 wiper slots. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now