fgxod Member 214 Member For: 13y 6m 27d Posted 01/05/11 11:33 AM Share Posted 01/05/11 11:33 AM hi guys im new to the forum and just like to say hi and ask a few questions about my car. since brand new iv expircened a noise that comes from the passenger side rear wheel. the sound is as if there is a high spot of the brake pad or the disk is wapped. it makes a hising noise. I took it to ford twice and all they did is cleaned it out and said they cant find anything wrong. I called the service manager and he told me if they want to look at it furture they will charge me. so I took it someone eles while I was getting my car serived at another ford dealer I asked them about it so they looked into it. the problem they found is that my axels are bent! and because I lowered the car its a common problem they see when people lower there cars. I find this hard to belive when it started happening around 400km into buying it new. also I have another problem it seems I have a few oil leaks from my car from the sight of my driveway. I took it to my mates shop were he hoisted it up and we noticed there is oil leaking from the timing case and the rear transmion seal. I already had my rear transmion seal fixed by ford under warrenty and it seems like its busted again. what do you guys think I should do. car is stock besides 20" wheels and lowered. Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 1d Gender: Male Location: Victoria Posted 01/05/11 11:48 AM Share Posted 01/05/11 11:48 AM Take it to Ford. That's what warranty is all about.I can't possibly see how lowering a ute would have any influence on the axles. Link to comment Share on other sites More sharing options...
fgxod Member 214 Member For: 13y 6m 27d Posted 01/05/11 12:07 PM Author Share Posted 01/05/11 12:07 PM (edited) it just seems like they dont want to know about it. Is there any good dealers in melbourne anyone can suggest for me to go to. Edited 02/05/11 06:57 AM by RHR No need to quote above post. USE FAST OR ADD REPLY Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 1d Gender: Male Location: Victoria Posted 01/05/11 12:42 PM Share Posted 01/05/11 12:42 PM What part of Melbourne are you in? Link to comment Share on other sites More sharing options...
sam_rigger Member 246 Member For: 13y 10m 11d Posted 01/05/11 09:10 PM Share Posted 01/05/11 09:10 PM Etheridge ford in Ringwood aren't too bad. The service manager is a nice guy. Link to comment Share on other sites More sharing options...
fgxod Member 214 Member For: 13y 6m 27d Posted 01/05/11 09:12 PM Author Share Posted 01/05/11 09:12 PM Essendon. I already been to the one in Essendon there the ones who said I have bent axels Link to comment Share on other sites More sharing options...
rob666 Member 62 Member For: 14y 4m 14d Posted 08/05/11 10:33 PM Share Posted 08/05/11 10:33 PM Hey mate just thought I'd let you know, I have a squeak coming from the rear. Ford tightened the handbrake cable and it has gotten a lot quieter. However when I picked up the car, they said I too have a bent rear axle.Mine is also lowered, but I doubt it would affect the axle? Link to comment Share on other sites More sharing options...
SMURF6 Jamie Donating Members 380 Member For: 15y 9m 22d Gender: Male Location: Maroubra, Sydney, NSW Posted 08/05/11 10:48 PM Share Posted 08/05/11 10:48 PM Mine also squeaks on the right brake when cornering hard. No one knows what it is. Mines a ute and recently lowered it. No idea.... Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 5d Gender: Male Location: SE Melbourne Posted 09/05/11 03:29 AM Share Posted 09/05/11 03:29 AM Its the runout of the disk just touching the brake pad anti rattle clip.....My theory anyway. Link to comment Share on other sites More sharing options...
NitroXR6T Member 28 Member For: 16y 5m 15d Posted 09/05/11 08:21 AM Share Posted 09/05/11 08:21 AM (edited) Bent axle = common problem but they don't admit to it.It is only ever so slightly bent which causes the disc to touch the pad when rotating. The only way to confirm it is to jack the car up, and put it in gear. Wheel/s will move in and outwards. (yes rims aren't manufactured perfectly.)If the left is bent, then there is a good chance the right is bent. Just get ready for the 'you lost it and hit a gutter' argument! Edited 09/05/11 08:23 AM by NitroXR6T Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now