Jump to content

Ebay Rotors


LazyBrennan

Recommended Posts

  • Member
  • Member For: 14y 3m
  • Gender: Male
  • Location: sydney

The above is correct. Uneven or over tensioned wheel nuts can cause brake shudder.

eff it, what do average well known mechanics charge labour to change and fit 2 front discs and brakes. Id rather it be done right then have a chance of warping it coz I was a tight :bum: .

Link to comment
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 15y 9m 29d
  • Gender: Male
  • Location: Adelaide

so I found these

http://www.ebay.com.au/itm/FORD-BF-FG-Xr6TURBO-XR8-G6E-TERRITORY-FRONT-DISC-ROTOR-/290566157088?pt=AU_Car_Parts_Accessories&hash=item43a717b320

I take it these are RDA. Again cheaper :P Seem to be 322mm as well. These will go on my bf mk2 xr6 turbo?

these are not gold passivated, I dunno what that means but don't they have to be??

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 9m 21d
  • Gender: Male
  • Location: Baldivis, Wait Ages.

Im all for paying a mechanic to do this job.... Problem is finding a good one around here. Any I have been too all seem to cut corners. :censored:

Link to comment
Share on other sites

  • It's All In Your Mind
  • Gold Donating Members
  • Member For: 21y 2m 13d
  • Gender: Male
  • Location: Melbourne

I bought a set of DBA Gold drilled and slotteds with Mu pads for the F6 then went O/S seas, I only got the drilled to keep the standard look, I came home, had them fitted and nothing but rattle rattle rattle, whether they are applied or just driving normally not using the brakes, rattle stop and shims don't make any difference. I was worried about the sound as it was getting worse so I had ford completly rip the things off and make sure all was OK in case the workshop who initially fitted them had put something on backwards or inside out. Got the car back today, and the only answer is new discs, these ones have done 200 klms and have not had a hard time in any way.

Brembo discs might cost more but at least if they rattle they will get replaced instead of running all over the countryside only to find the product is faulty. Its the 3rd set of DBAs I've bought and I've never had the problem before, but it will be the last. I don't give a toss how well the discs work because I don't drive that fast but I can't stand the rattle and I won't intentionally buy anything from a company that would release such a crap product in the first place. When profit takes precedence over quality then as far as I'm concerned :finger:

Edited by hypnodoc
Link to comment
Share on other sites

  • 2 weeks later...
  • Donating Members
  • Member For: 16y 1m 20d
  • Gender: Male
  • Location: SE Melbourne

I paid 400 for the bigger rda slotted rotors front and back including pads all round. I thought that was a good deal.

That price above is about right

Edited by Paulie2256
Link to comment
Share on other sites

  • 10 months later...
  • Donating Members
  • Member For: 16y 1m 4d
  • Gender: Male
  • Location: CQ

http://www.ebay.com.au/itm/FORD-FALCON-BF-FG-TERRITORY-FRT-GROOVED-BRAKE-COMBO-PAK-/110662612413?pt=AU_Car_Parts_Accessories&hash=item19c40175bd

anyone see a problem with these fitting a xr6t fg? they say territory front 321mm, but arent the brakes the same as the 322mm fg fronts???

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'