sim302 Member 20 Member For: 16y Posted 03/04/11 05:33 AM Share Posted 03/04/11 05:33 AM Hi, I have recently purchased an 800HP Plazmaman intercooler kit complete with hot side piping. I was not sent fitting instructions with the kit. Need some info on mounting the cooler and piping orientation. Some things are obviouse, however others are a bit tricky. Just wondering if anyone on here has fitted this kit and they might have the instructions they could email me?Also not sure where BOV now sits and I was not supplied BOV vacuum hose.Kit looks the goods, very happy so far. except no instructions.I will contact plazmaman next week, just after something asap.Any help is greatly appreciated. Link to comment Share on other sites More sharing options...
dre Resident idiot. Donating Members 2,068 Member For: 14y 3m 2d Gender: Male Location: Melbourne Posted 03/04/11 05:47 AM Share Posted 03/04/11 05:47 AM (edited) Alex will send info, just ask for it. Had the same issues with my 1000hp kitEmail him your number and your problem, he'll call you back He emailed me back fitting instructions and some photos installed. Edited 03/04/11 05:48 AM by dre Link to comment Share on other sites More sharing options...
sim302 Member 20 Member For: 16y Posted 03/04/11 06:41 AM Author Share Posted 03/04/11 06:41 AM Thanks mate, Alex has been great to deal with. Just wanted something today to get it started. Will talk to him tomorrow.Thanks again. Link to comment Share on other sites More sharing options...
nikofgxr6t Bronze Donating Members 284 Member For: 13y 11m Gender: Male Posted 05/04/11 05:40 AM Share Posted 05/04/11 05:40 AM Hey mate how did u go with ya cooler all good? Link to comment Share on other sites More sharing options...
sim302 Member 20 Member For: 16y Posted 05/04/11 10:41 PM Author Share Posted 05/04/11 10:41 PM Hey mate how did u go with ya cooler all good?Cooler's installed & hot side piping. About to do cold side. Not sure if I need to cut out any metal under headlight etc. Was sent a few basic instructions ( for CAI and mounting cooler only). No helpful pictures. Need to buy a vacuum line for BOV as one was not sent in kit. Getting there! Link to comment Share on other sites More sharing options...
dre Resident idiot. Donating Members 2,068 Member For: 14y 3m 2d Gender: Male Location: Melbourne Posted 06/04/11 02:37 AM Share Posted 06/04/11 02:37 AM doesn't the BOV go in the same spot? why would you need a new vac line? Link to comment Share on other sites More sharing options...
Bigkeels Throbbing Member Donating Members 594 Member For: 15y 10m 17d Gender: Male Location: Victoria Posted 06/04/11 07:09 AM Share Posted 06/04/11 07:09 AM Make sure you put some pics up mate, hot side easy enough to get on? The cooler mounts using existing holes yeh? Link to comment Share on other sites More sharing options...
nikofgxr6t Bronze Donating Members 284 Member For: 13y 11m Gender: Male Posted 06/04/11 08:53 PM Share Posted 06/04/11 08:53 PM Cooler's installed & hot side piping. About to do cold side. Not sure if I need to cut out any metal under headlight etc. Was sent a few basic instructions ( for CAI and mounting cooler only). No helpful pictures. Need to buy a vacuum line for BOV as one was not sent in kit. Getting there!Nah mate I got the same cooler and only had to grind the air con condensor bolts there was a plastic mount going across between the headlights a cut that out I can take a pic of the mount I cut if you want pretty sure you supposed to enlarge the passenger side hole but I got away with it check my posts about it if you like I had a few issues doing my cooler aswell Alex from plazmaman helped me Link to comment Share on other sites More sharing options...
sim302 Member 20 Member For: 16y Posted 06/04/11 11:26 PM Author Share Posted 06/04/11 11:26 PM Make sure you put some pics up mate, hot side easy enough to get on? The cooler mounts using existing holes yeh?Cooler uses two holes that are already drilled on the bottom radiator support panel ( just need to tap M6). The top mounting point you just drill two new holes, the Plastic cowl that sits under your bonnet release latch covers these bolts.Hot side pretty easy to get on.Will post some pics when im done.Cheers Link to comment Share on other sites More sharing options...
sim302 Member 20 Member For: 16y Posted 11/04/11 10:19 PM Author Share Posted 11/04/11 10:19 PM Cooler uses two holes that are already drilled on the bottom radiator support panel ( just need to tap M6). The top mounting point you just drill two new holes, the Plastic cowl that sits under your bonnet release latch covers these bolts.Hot side pretty easy to get on.Will post some pics when im done.CheersPretty much sorted out now.Will post photo's etc a bit later. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now