xpl0sive Member 421 Member For: 15y 10m 29d Gender: Male Location: Melbourne Posted 29/03/11 11:27 AM Share Posted 29/03/11 11:27 AM LOL hell yes! I dont mind about the flutterdump but I love that intake.yeh it is getting tuned at the same time, with injectors and valve springs aswell :D so you guys reckon the big racebox?and what size pipes on the hot side and cold size normally?its a 02 BA so im prob not gonna up the boost to much as the rods arent that strong but we will see how we go!was gonna go PROCESS WEST stage 2 or maybe the racebox now...race airbox would be a waste of time if you're not chasing big power. The under battery CAI will give you plenty of noise mate. It's upto you which way you wanna go though. It will cost a lot less to use an under battery CAI though as you won't need to relocate your battery.Can't remember the size of the hot side pipes I used, I think they were 2.5". It was this kit: https://www.plazmaman.com/shop/index.php?action=item&itemId=218Comes in 2 styles, 700hp and 1000hp. They are just different sizes that's all.This cooler/CAI kit would give you best bang for buck in my opinion: https://www.plazmaman.com/shop/index.php?action=item&itemId=203 Link to comment Share on other sites More sharing options...
Ricks_Xr6t Member 101 Member For: 15y 11m 3d Gender: Male Location: Karratha,W.A. Posted 29/03/11 01:29 PM Share Posted 29/03/11 01:29 PM (edited) RAPIDsystems.com.au XR6T at Wakefield Park Raceway pt 3! Now Chris's airbox sounds nuts,you should get one of these :buttrock:sorry I suck at links copy and paste it bud Edited 29/03/11 01:30 PM by Ricks_Xr6t Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 26d Gender: Male Location: Probably above atmospheric pressure Posted 30/03/11 05:13 AM Share Posted 30/03/11 05:13 AM Mine sounds pretty harsh but I suspect it's due to the factory snorkle being removed (also have F6 lower intake) from the factory airbox (with K&N panel filter) to make way for nizpro cold sise pipes, the hard circular edge sounds pretty nasty. Also whistles/hisses just at light acceleration. I like it! Blew past a stock BA and we had a chat later on, he reckoned it sounded exactly how we wanted his to so I figure it's good as is. I run 15PSI. Link to comment Share on other sites More sharing options...
Cheaty McCheats Totally not a Cop Donating Members 821 Member For: 13y 10m 25d Gender: Male Location: Melbourne Posted 30/03/11 03:35 PM Share Posted 30/03/11 03:35 PM I can vouch for Steves sounding nice. When that thing went passed on the freeway, man... you owe me new pants... Link to comment Share on other sites More sharing options...
Damien_BAXR6T Member 31 Member For: 13y 8m 27d Posted 31/03/11 06:17 AM Author Share Posted 31/03/11 06:17 AM ah cool looking at things and budget I might get the UB CAI from Rapid along with the Hot side pipes :D (along with injectors valve springs tune etc).alot of sights say you cant do the UB CAI with factory cooler, but do they mean the factory cooler hotside pipes? so since im getting rid of them and using the rapid ones there is the free area for the UB CAI filter then under the battery?was also wondering, as I havent driven the car properly yet it isnt registered and has no exhaust from the dump back so not the best idea to drive it... does the factory BOV make much noise? I wanted a sharp release while being loud. I dont want a dose or flutter I just want a mega loud intake and spool noise with a nice loud and sharp BOV (yes I know that flutter doesnt hurt your turbo or anything I just prefer this sound :D ).looking forward to heaing back fella's cant wait till I can drive it! Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 26d Gender: Male Location: Probably above atmospheric pressure Posted 31/03/11 06:21 AM Share Posted 31/03/11 06:21 AM (edited) Sick! Thanks. Cheap too hahaha.Oh and I have a lot of flutter with the stock Bosch BF BOV. It doesn't vent to atmo so no PSSHT noise, only flutter. Think you'd need an aftermarket BOV to really get the right sound? I don't have experience fitting them though. Edited 31/03/11 06:24 AM by -SteveR- Link to comment Share on other sites More sharing options...
Damien_BAXR6T Member 31 Member For: 13y 8m 27d Posted 31/03/11 06:33 AM Author Share Posted 31/03/11 06:33 AM so even if it vents into a plumb-back you cant get that sound? damn was hoping to be legal lol.did you tighten up your BOV so it doesnt vent? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 26d Gender: Male Location: Probably above atmospheric pressure Posted 31/03/11 11:25 AM Share Posted 31/03/11 11:25 AM If it plumbs back but can't flow enough gas (ie like my stock system) it will flutter. I haven't touched my BOV, just running triple the factory boost! I don't know if the PSSHT sound can happen with 100% plumb back. You can buy adjustable BOV's that go from 100% atmo vent to 100% plumb back, not sure of the models to get though. StealthFX rings a bell, check the past threads. Link to comment Share on other sites More sharing options...
Damien_BAXR6T Member 31 Member For: 13y 8m 27d Posted 12/04/11 03:21 AM Author Share Posted 12/04/11 03:21 AM ah k cool.due to the fact I hate doing things twice im leaving my whole cooler and intake set up stock for a couple years and then get the process west 2.5 kit. dont wanna spen 1000 on all the piping and intake just to replace it later, can spend it on other stuff ill keep yeh im guessing ill have to get a aftermarket BOV to get the sound I want as the stock one seems to be either very queit or flutter.anyways let the saving begin! Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,043 Member For: 16y 8m 11d Gender: Male Location: Melbourne Posted 12/04/11 07:19 AM Share Posted 12/04/11 07:19 AM By the way, you can't run the UB CAI with the factory intercoolers cold side, as it takes up that area under the battery. If you are replacing the cold side kit and/or intercooler with any aftermarket one ( that doesn't retain the factory cold side under-battery pipe), the UB CAI is your best bet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now