Any One Else Running A Plazmaman 800 Hp Kit?

[Craig.]

Hey guys.

Just picked up a second hand plazmaman 800 HP kit with the under battery pipe and pod filter and cold side piping and wanted to see if anyone else was running the same set up.

What kind if power is being made with these kits and which mods have you done to get to that figure?

I am just doing the kit, high flow cat, injectors and fuel pump with a tune first up, but eventually would like to get 350RWKW. Is this kit up to it?

[Stazza_Brendan]

I heard about that kit in the pocket trader. Sounds like its going to be put to good use.

I think the general rule is the under battery intakes are good for 350kw.

[Craig.]

Yeah that's the one mate.

The bloke was happy to negotiate when I waved a roll of $50s under his nose, so I got it for a bit less than the advertised price too.

[Stazza_Brendan]

Lucky, I was tempted but I want to run a PW relocated throttle body setup.

Want a hand fitting it let me know. be interesting to see one in flesh all fitted up.

[Craig.]

Thanks for the offer mate.

I was going to fit the same PW kit as you are talking about. Stage 2.3 I think? This one came up though so I thought why not get it and save some $$.

[MiKa]

Well it is there 800hp kit.. Wouldnt it be rated at 800hp? I duuno mate but plazmaman gear is awsome and work very well.

[Craig.]

I understand that this kit in theory has the potential to support 800 HP but obviously not in its own. How easily will it make 350Rwkw?

I'm just after info on how easy it makes the power and what has worked for others who have used the kit. It seems like not too many here have used it though.

[6onb00st]

hi mate I have the 800hp kit plus aps exhaust,injectors,plazmaman surgetank with 044,turbo porting + 8psi flapper. im currently making 350rwkw at 15psi and am hoping for more once I do the valvesprings.

[xpl0sive]

  On 22/02/2011 at 6:46 AM, craiginmackay said:

I understand that this kit in theory has the potential to support 800 HP but obviously not in its own. How easily will it make 350Rwkw?

I'm just after info on how easy it makes the power and what has worked for others who have used the kit. It seems like not too many here have used it though.

Many people have used it mate, they just aren't on the forums. I've seen people make this power with the stage 1 plazmaman, so this kit should do the job just fine

[xsicute]

I'm running the 800hp kit with deka inj,ported wastegate,walbro fuel pump,4" dump 16psi boost making 373rwkw