Process West Member 248 Member For: 18y 5m 13d Gender: Male Location: Wollongong NSW Posted 29/06/11 11:31 PM Share Posted 29/06/11 11:31 PM At this stage I can only confirm that the elbow will fit with my stage 2 piping kit. It wont work with the factory piping.I wont be taking anymore orders for this part at the moment. The tooling is being produced to have this cast in one piece and will be 4-5 weeks awayKev Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 6m 4d Gender: Male Location: Gold Coast Posted 30/06/11 03:34 AM Share Posted 30/06/11 03:34 AM At this stage I can only confirm that the elbow will fit with my stage 2 piping kit. It wont work with the factory piping.KevKev I have a hard pipe kit in 63mm (not yours) that obviously lines up with the current OEM elbow. Given your stage 2 also lines up, so finished height must be the same, is the only difference that prevents the OEM hoses from being used length? Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 9m 1d Gender: Male Posted 30/06/11 06:59 AM Share Posted 30/06/11 06:59 AM nice. im geting one.. Link to comment Share on other sites More sharing options...
Process West Member 248 Member For: 18y 5m 13d Gender: Male Location: Wollongong NSW Posted 30/06/11 07:12 AM Share Posted 30/06/11 07:12 AM Kev I have a hard pipe kit in 63mm (not yours) that obviously lines up with the current OEM elbow. Given your stage 2 also lines up, so finished height must be the same, is the only difference that prevents the OEM hoses from being used length?The problem is the factory plastic intercooler hose is approx. 63mm ID where it clamps on....my elbow is 76mm OD.If you buy a 3in to 2.5in straight silicon hose joiner then you should be able to use my elbowKev Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 6m 4d Gender: Male Location: Gold Coast Posted 30/06/11 08:09 AM Share Posted 30/06/11 08:09 AM If you buy a 3in to 2.5in straight silicon hose joiner then you should be able to use my elbowKevcheers Kev. Link to comment Share on other sites More sharing options...
unclewal Donating Members 583 Member For: 14y 1m 26d Posted 01/07/11 12:40 AM Share Posted 01/07/11 12:40 AM Mine arrived today, packed like it was made of fragile glass, unbelievable quality just in the shipping, the elbow is flawless, comes with everything for a straight swap over, fitting it tonight, thanks again Kev, another quality bit of gear for the best price in the market ! Link to comment Share on other sites More sharing options...
Nolz Member 80 Member For: 16y 2m 11d Gender: Male Location: Castle Hill Posted 06/07/11 12:03 PM Share Posted 06/07/11 12:03 PM Is the new batch of cast elbows available yet?....It's the missing piece in my cars intercooling puzzle. Link to comment Share on other sites More sharing options...
Process West Member 248 Member For: 18y 5m 13d Gender: Male Location: Wollongong NSW Posted 07/07/11 12:31 AM Share Posted 07/07/11 12:31 AM $99 from memory.Correct the Process West part below is $99.00 Link to comment Share on other sites More sharing options...
Barra Donating Members 467 Member For: 16y 1d Gender: Male Location: Toowoomba Posted 07/07/11 02:09 AM Share Posted 07/07/11 02:09 AM And you have to tap your own thread for the pressure sensor for the top pic. Hmmmmm.... Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 5m 27d Gender: Male Location: Sydney NSW Posted 07/07/11 02:14 AM Share Posted 07/07/11 02:14 AM You re-use the OEM self-tapping screw. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now