IBTZNU Member 14 Member For: 15y 7m 23d Gender: Male Posted 02/02/11 07:13 AM Share Posted 02/02/11 07:13 AM (edited) any ideas? Do I have to take it some where or can I do it my self? Edited 02/02/11 07:14 AM by IBTZNU Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 11m 24d Posted 02/02/11 07:20 AM Share Posted 02/02/11 07:20 AM using the stock icc as the source of you signal? Should be a guide on here for it somewhere but you will need a loc converter and you hook this into the signal from the rear speakers and that gives you the signal from your amps. Then you needa run your power and remote trigger cable for your amp. You can do it yourself if you know how to wire things up and pull apart you car. If you dont know either start doing some reasearch on how to pull apart your car and what you need to wire up your amp. If you have no idea I would say take it to someone to do Link to comment Share on other sites More sharing options...
SMURF6 Jamie Donating Members 380 Member For: 16y 10d Gender: Male Location: Maroubra, Sydney, NSW Posted 02/02/11 09:21 AM Share Posted 02/02/11 09:21 AM Done this a thousand times in my car. At the moment I have the latest Digital Alpine Mono block amp using a High to low level speaker converter but I am getting engine noise when I start up the car. If you need any help I'm more than happy to help you. I have never had this issue and no one has ever seen it. I think it's my amp as my old amps never did this in the same car. Link to comment Share on other sites More sharing options...
natsxr6 Member 117 Member For: 16y 8m 28d Location: penrith Posted 11/02/11 03:52 AM Share Posted 11/02/11 03:52 AM Had the same issue smurf when they installed mine but they did 1 the day before with sony amps and had no issues. all they did was add a noise filter Link to comment Share on other sites More sharing options...
IBTZNU Member 14 Member For: 15y 7m 23d Gender: Male Posted 15/02/11 04:01 AM Author Share Posted 15/02/11 04:01 AM Does any1 know wot the wires on the stock amp are, like wot colour is for which spearker L R and so on??? Thanks guys!!!!!!!!!!!1 Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 11m 24d Posted 15/02/11 08:03 AM Share Posted 15/02/11 08:03 AM there should only be one output for the stock amp and that will be for the sub, the speakers are unamped and get their signal from the stock h/u Link to comment Share on other sites More sharing options...
zumo Member 14 Member For: 13y 10m 21d Posted 28/03/11 05:11 AM Share Posted 28/03/11 05:11 AM Done this a thousand times in my car. At the moment I have the latest Digital Alpine Mono block amp using a High to low level speaker converter but I am getting engine noise when I start up the car. If you need any help I'm more than happy to help you. I have never had this issue and no one has ever seen it. I think it's my amp as my old amps never did this in the same car.Sometimes if the gain or signal is turned up to high on your amp you will get this feed back or bad earth but the way to figure it out is turn your gain down and your head unit down then check for the noise can be feedback Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now