Tockley Member 51 Member For: 16y 6m 10d Gender: Male Location: Melbourne Posted 03/02/11 12:12 AM Author Share Posted 03/02/11 12:12 AM Yeah its a manual. I am reasonably comfortable that the clutch can survive as I am not really chasing 300rwkw as tempting as that number is!!Around 260rwkw should easily suffice and at this stage I won't be chasing any more (likely story! )Obviously if my mods allow me to go higher and still be a relatively safe tune, I won't complain.So looks like a high flow cat is recommended, I will add that to the list. If I am already looking at cat back, and now a high flow cat is it worth doing turbo back if I'm not chasing 300+rwkw? Would rather put the money to other stuff than overkill on exhaust.Any recommendations on injectors? Most people use the deka 60lb afaik - any other options if I'm not chasing 300+? Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1077859 Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 23d Gender: Male Location: Vic Posted 03/02/11 12:47 AM Share Posted 03/02/11 12:47 AM Bosch 968s give nicer idle quality but max at low 300s. No point doing turbo back for that level. Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1077872 Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 8m 20d Gender: Male Location: Victoria Posted 03/02/11 01:00 AM Share Posted 03/02/11 01:00 AM Max at 340-350... I had them in my car... Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1077874 Share on other sites More sharing options...
MercuryXr6Turbo Member 361 Member For: 16y 6m 13d Gender: Male Location: Perth, WA Posted 03/02/11 02:23 PM Share Posted 03/02/11 02:23 PM (edited) Take a look at my signature for ideas mate... it did make 300rwkw but was eased off due to valve float... you wont have to worry about that though having a mk2 BFThe actuator upgrade was only added for good measure but you could get by without it. If you also decide to leave the F6 cooler off the list I reckon you will get close to what I'm getting... so Injectors, cat and tune will = Oh and in regard to oil feed line and filter... I had my oil feed filter changed in my service the other day, good maintenance... keep that oil flowing fast to the turbo!!! Edited 03/02/11 02:29 PM by MercuryXr6Turbo Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1078093 Share on other sites More sharing options...
Tockley Member 51 Member For: 16y 6m 10d Gender: Male Location: Melbourne Posted 03/02/11 11:43 PM Author Share Posted 03/02/11 11:43 PM Thanks guys, appreciate the response. I will grab some 42lb injectors. If I can source an F6 cooler, I will look at that as well. Can't hurt! I am thinking about chucking in a Mal Wood short shifter too, may as well while everything else is being done!Next stop, new rotors, followed by tuner... safety first! Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1078160 Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 10m 15d Gender: Male Location: @ my laptop Posted 04/02/11 02:31 AM Share Posted 04/02/11 02:31 AM (edited) The FPV cooler is not great for higher levels, although it will flow enough air, it will not cool well.We normally have the Mal Wood shifters in stock Edited 04/02/11 07:51 AM by ratter Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1078199 Share on other sites More sharing options...
callanmack Member 21 Member For: 15y 4m 24d Posted 04/02/11 07:32 AM Share Posted 04/02/11 07:32 AM cai, cat, injectors and tune, you will be surprised Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1078315 Share on other sites More sharing options...
Tockley Member 51 Member For: 16y 6m 10d Gender: Male Location: Melbourne Posted 06/02/11 11:46 PM Author Share Posted 06/02/11 11:46 PM I'll be giving you a call soon if I can work out the hike to/from Frankston for the drop off ratter! Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1078995 Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 10m 15d Gender: Male Location: @ my laptop Posted 07/02/11 03:08 AM Share Posted 07/02/11 03:08 AM no worries mate, look forward to helping if we can Link to comment https://www.fordxr6turbo.com/forum/topic/73015-mods-time-finally/page/2/#findComment-1079015 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now