ChRiDDa Member 2 Member For: 14y 4m 2d Posted 27/01/11 07:29 AM Share Posted 27/01/11 07:29 AM Hey All,Just a quick question in regards to exhaust manifold torque settings - I've read that 27Nm is the recommended torque for the exhaust manifold bolts, but in the Gregories service manual I have, it recommends 40Nm for the turbo (27Nm for N/A 6)Local Ford dealer wouldnt tell me what it should be, hoping one of you kind folk will be able to shed some light as to what it should be!Cheers! Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 7m 2d Gender: Male Location: Earth Posted 27/01/11 08:32 AM Share Posted 27/01/11 08:32 AM Which model? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 29d Gender: Male Location: Perth Posted 27/01/11 08:46 AM Share Posted 27/01/11 08:46 AM 27Nm with anitseize and Nordloc washer fitted. Link to comment Share on other sites More sharing options...
ChRiDDa Member 2 Member For: 14y 4m 2d Posted 27/01/11 09:08 AM Author Share Posted 27/01/11 09:08 AM whoops, might be helpful if I included that ay!2005 BF XR6TIs it necessary to apply the antiseize n the washer or can you just use the torque wrench n just nip them all back up again?When is the ideal time to do it? ie when the motors stone cold, warm (switched off 3 hours ago) or when its hot? Link to comment Share on other sites More sharing options...
kiWoD-6T Bronze Donating Members 6 Member For: 13y 9m 12d Posted 30/10/11 11:59 AM Share Posted 30/10/11 11:59 AM whoops, might be helpful if I included that ay!2005 BF XR6TIs it necessary to apply the antiseize n the washer or can you just use the torque wrench n just nip them all back up again?When is the ideal time to do it? ie when the motors stone cold, warm (switched off 3 hours ago) or when its hot?I would like some more info on this also, I have a BFII XR6T Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 25d Gender: Male Location: Perth Posted 30/10/11 04:17 PM Share Posted 30/10/11 04:17 PM its 40Nm for the turbo Ex manifold to head and 55Nm for the turbo to Ex manifold. Straight from ford workshop manual. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 27d Gender: Male Location: Far north queensland Posted 30/10/11 07:51 PM Share Posted 30/10/11 07:51 PM 40nm is too high for high tensile into aluminium innit? I always thought it was 27 and did mine at 32nm.Just checked Ford the manual again 27nm. Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 14y 12d Posted 30/10/11 09:09 PM Share Posted 30/10/11 09:09 PM There was a revision for BF I think it was, to 40nm. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 27d Gender: Male Location: Far north queensland Posted 30/10/11 09:34 PM Share Posted 30/10/11 09:34 PM Now I'm confused - I was looking in the BF manualsays 27 . . . . . but I then went to the section on removing/installing the turbo and the torque settings say 40nm.I wouldn't go over 40 for fear of stripping the thread, but 27 does feel like stuff all. think I might do mine this weekend and go for 37. Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 14y 2d Posted 31/10/11 12:12 AM Share Posted 31/10/11 12:12 AM I've never used a torque Setting with any of my cars. Never had a drama. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now