Tobey Awesome... Member 407 Member For: 14y 7m 19d Gender: Male Posted 20/04/11 10:52 PM Share Posted 20/04/11 10:52 PM Hey guys after an apinion on a new clutch tosing up between a malwood option3 plus or option 4 Now this car isnt baby'd around I plan on draging it quiet often. And let just say tyres dont last a long time. I know no clutch will like sh*t load of burnouts etc and I plan on pushing power upto around 370rwkw soon. Its curently at 340 with 800nm of torque. Any info would be great cheers and any other clutch I should considerHave a look at NPC, they designed the clutches with MW. I think I'll be going with their clutch for my ute... Link to comment Share on other sites More sharing options...
micheal Member 69 Member For: 16y 6m 6d Posted 21/04/11 12:11 AM Author Share Posted 21/04/11 12:11 AM Yeah my intercooler is to small and is stockDump hoping for 370 ish at 16psi dont wanna push the ba to hard just into the high 10s Link to comment Share on other sites More sharing options...
BAjoe Banned 43 Member For: 13y 10m 27d Gender: Male Posted 21/04/11 01:07 AM Share Posted 21/04/11 01:07 AM life could be a dream... shaboom shaboom... Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 11m 9d Gender: Male Location: W.A Posted 21/04/11 02:38 AM Share Posted 21/04/11 02:38 AM My BA was fine @ 18psi for over 2 years and 350 rwkw's 880nm and it got thrashed on a daily basis, the auto was another story.... Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 8m 28d Gender: Male Location: @ my laptop Posted 21/04/11 02:47 AM Share Posted 21/04/11 02:47 AM Have a look at NPC, they designed the clutches with MW. I think I'll be going with their clutch for my ute...NPC only make cetain components in certain Mal Wood Clutches to Mals specifications, any NPC clutch is not a Mal Wood clutch Link to comment Share on other sites More sharing options...
SPOOLAX Skids? Donating Members 975 Member For: 15y 9m 17d Gender: Male Location: Adelaide Posted 28/04/11 12:55 AM Share Posted 28/04/11 12:55 AM I got 18psi now ba rods are fine lol Link to comment Share on other sites More sharing options...
micheal Member 69 Member For: 16y 6m 6d Posted 29/06/11 01:32 AM Author Share Posted 29/06/11 01:32 AM So mine last 3years on 350rwkw and 8months on 340.1rwkw before water killed my ba rods so plan is to change to 400kw clubBuild includes Torque plate bored, and balenced motor Forged rods pistons (most likly malhe pistons and scat rods) billet oil pump gears, girdle plate, race balencer, arp head and main bolts. -Turbo ported and flapper install-Plazmaman intercooler 800hp kit with plenum-4in intake and 4in dump/full exhaust-eboost2 controller Hopefully see 400rwkw with that Then in dec I will be take it to melborne after I fit a t51r turbo, fuel rail, 80lb injector, another 044 pump and my surge tank is set up to run two, full braided line from pump to rail going to run twin lines with separate filters then fuel pressure reg aftermarket. And a race tune and street tune. Hopefully about 450rwkw on bp98 and 550rwkw on race fuel. The powercruise to smoke some sh*tty super charged common whores Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now