shaunbags Member 92 Member For: 16y 4m 23d Gender: Male Location: perth WA Posted 17/01/11 10:19 AM Share Posted 17/01/11 10:19 AM hey guys I was under the car today and the rubber flex joint between the tailshaft and tranny is looking a bit shagged, does anyone know where I can get a replacement?This is the pic out of the workshop manualLooks to me that you just undo the bolts, slip the bit out and chuck the new one in,Anyone chucked one in that can tell me if that's all that's involved:)Cheers If anyone has what was the flex joint price? Link to comment Share on other sites More sharing options...
01txr Member 861 Member For: 18y 1m 16d Gender: Male Location: QLD Posted 17/01/11 01:32 PM Share Posted 17/01/11 01:32 PM Apparently the Late model camira v8 one fits and is slightly stronger and cheaper?I enquired a while ago, but because engine let go I did not get one. Think they where something like $250 from ford?And auto shops not far behind. Tried a tailshaft manufacture here in QLD and was told V8 Late model camira and $150?Hard to imagine that small bit of rubber taking all the power and torque these cars put out. Link to comment Share on other sites More sharing options...
shaunbags Member 92 Member For: 16y 4m 23d Gender: Male Location: perth WA Posted 17/01/11 11:23 PM Author Share Posted 17/01/11 11:23 PM Cheers 01txr,Yeah they are a tough little unit, even all the big machinery I work on has them 100t+ and surprisingly they don't fail very much, but like anything once it does let go...... Link to comment Share on other sites More sharing options...
FPV6T UNDERCOAT CRUISER!!! Donating Members 1,655 Member For: 16y 1m 13d Gender: Male Location: brisbane Posted 18/01/11 05:51 AM Share Posted 18/01/11 05:51 AM yeah got mine from fraud,$250 I've done 2 in 2 years!! Link to comment Share on other sites More sharing options...
YOB POM Member 140 Member For: 19y 8m 25d Gender: Male Location: Jimboomba Qld Posted 18/01/11 05:53 AM Share Posted 18/01/11 05:53 AM Just make sure you mark them so you can put them back in exactly the same way or you risk vibration,not always necessary but a good idea.John. Link to comment Share on other sites More sharing options...
shaunbags Member 92 Member For: 16y 4m 23d Gender: Male Location: perth WA Posted 18/01/11 08:32 AM Author Share Posted 18/01/11 08:32 AM Yeah it's all good, I jacked up the back so I could spin the shaftThen I slid under and noted the shaft position and started undoing the bolts(looking pretty shagged)I then undone the rest of the bolts and grabbed both shafts and pulled them apart till there was clearance to pull the short shaft down and it popped strait offSo its obviously fingered, I got ordered one from coventrys (in Perth) for 213.70 I think it was, won't rock up till tomorrow morn when I fit it Link to comment Share on other sites More sharing options...
xhxrsix Member 174 Member For: 18y 3m 23d Gender: Male Location: Melbourne Posted 18/01/11 01:34 PM Share Posted 18/01/11 01:34 PM Haha that is pretty stuffed!I have replaced mine before but just got one from the wreckers for $80, as ford told me it comes with the tailshaft? Ah gotta love ford!Mine only had small cracks or tears in it.. Link to comment Share on other sites More sharing options...
shaunbags Member 92 Member For: 16y 4m 23d Gender: Male Location: perth WA Posted 19/01/11 02:24 PM Author Share Posted 19/01/11 02:24 PM Well all fitted no worries besides being given the wrong part 3 times...... Just tell them it's a v8 if you have to go in there..... Or they will give you taxi spec This is the correct part number for the turbos and v8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now