Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 21d Gender: Male Location: Melbourne Posted 16/01/11 09:19 AM Share Posted 16/01/11 09:19 AM Also from what I can tell the PW kit and the Plazmaman kit are roughly the same price part for part. Don't forget that the Plazmaman kit doesn't come with the hot side piping which IMO make the rest of the kit rather pointless and the PW Kit has the TB relocation which ads $$, so if you lose that there roughly the same price. And you could get there without the cooler but it would be better if you could get one, maybe even a cheaper HDI or soemthing? Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 8m 25d Posted 16/01/11 10:41 AM Author Share Posted 16/01/11 10:41 AM I really would like to elimanite the factory crossover and have an under battery intake on the car, but I cant justify spending 2k on a kit if its only going to be used to 50% of its potetial http://hiroperformance.com.au/hiroperformance/products/HDi-X1-Spec-Intercooler-Kit-%252d-Ford-Falcon-BA-XR6-Turbo.htmlseems cheap enough, anyone fitted one of these kits? Got a pic of them installed?Will be keeping my eye on the classifieds just incase someone is selling a kit too Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 21d Gender: Male Location: Melbourne Posted 16/01/11 10:53 AM Share Posted 16/01/11 10:53 AM Check out RapidSystems mate, His kit does both for $1729. Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 8m 25d Posted 16/01/11 11:10 AM Author Share Posted 16/01/11 11:10 AM yeah was tossing up between the process west and rapids but I like the look of the process west one better, just the look of the throtle body relocation, looks alot neater and less pipework, might have to start some saving and wait a month or two, see what they say at pitlane tomorrow Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 21d Gender: Male Location: Melbourne Posted 16/01/11 11:20 AM Share Posted 16/01/11 11:20 AM Ahh no worries then, no matter what kit you go with Mick will get the best out of it Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 6m 21d Gender: Male Location: Victoria Posted 16/01/11 11:45 AM Share Posted 16/01/11 11:45 AM +1 for Process West. Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 8m 25d Posted 19/01/11 12:19 PM Author Share Posted 19/01/11 12:19 PM ok well my plans are starting to change once again, having a fair bita hassel just to get a airbox fitted, so now im deciding to buy a new cooler, just so I can get the airbox to work and look good. Prblems I've had, mostly the battery is the biggest prob because I dont want to relocate it to the boot, I want it on the other side of the engine bay. I was going to get a rapids V.1 kit but because of the way the cold side runs the battery wont fit... Been thinking of a hdi cooler but dont like the idea of cutting the front bar and just dont like the look of their piping for some reason. And it seems my last option is process west, like their piping and the cooler fits with no cutting but I dont like the price tag, lol... so it seems that fitting an airbox is going to work out to be about 2000, lol. something I didnt want to spend in the first place, but it seems as its going to be the best way. Rapid do make a pipe that will allow me to use the airbox with the stock cooler but at 300 and having to cut the airbox to accomodat the pipe im not to keen on as I wanted to upgrade the cooler later so I dont want a hole in the airbox. hmmm reading over this seems im a bit picky on stuff, lol. This damn airbox better be worth it, lol. still wondering if I should just go with the hdi, it does look good through the front, but the piping and cutting just puts me off, arhhhh few more weeks and ill hopefully have it sorted, lolrant over/ Link to comment Share on other sites More sharing options...
Kingers. Member 227 Member For: 14y 8m 25d Posted 19/01/11 12:47 PM Author Share Posted 19/01/11 12:47 PM any other kits I could look at? aps has one but I dont know how much and nizpro are to pricey Link to comment Share on other sites More sharing options...
freeze_dk I am dissatisfied with my current employment situation Donating Members 8,610 Member For: 18y 1m 18d Gender: Male Posted 19/01/11 01:37 PM Share Posted 19/01/11 01:37 PM 4inch Intake & Airbox kit Link to comment Share on other sites More sharing options...
j.d Member 1,222 Member For: 14y 3m 19d Gender: Male Location: Eastern Suburbs, Melbourne Posted 19/01/11 07:12 PM Share Posted 19/01/11 07:12 PM You'll need a clutch dude... $2k Mal Woods option 3... Anything over 260-70rwkw and stock clutch will die!henz has just over 300kw atw with stock clutch, think it might be on it last legs now, but lasted him around 8 months or so I think.all depends on the way you drive Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now