Jump to content

Recommended Posts

  • Member
  • Member For: 16y 9m 4d

As a few of you know from my previous post last week I have blown my t5 gearbox in my BA Turbo I need a replacement fast need the car on road again im from western sydney any one know where I can get a 6 speed or beefed up 5 speed from??

  • Banned
  • Member For: 15y 9m 23d
  • Gender: Male
  • Location: Aspendale, Vic.

check the classifieds. someone is selling a t56 in there. IMO grab the clutch to in a package.

Edited by icer
  • 5 weeks later...
  • Member
  • Member For: 14y 4m 27d
  • Gender: Male
  • Location: liverpool
  On 03/01/2011 at 9:49 AM, andrewx19x said:

As a few of you know from my previous post last week I have blown my t5 gearbox in my BA Turbo I need a replacement fast need the car on road again im from western sydney any one know where I can get a 6 speed or beefed up 5 speed from??

are you still in need for a t5 or t56 I would recommend staying with the t5 as the t56 will require the pcm wiring loom to be modified and maybe a tailshaft change I have a t5 post me if you are intrested??

  • Member
  • Member For: 18y 11m 13d
  • Gender: Male
  • Location: @ my laptop

Mal Woods or his agents (us :innocent: ) can supply all you need to do the conversion from 5 speed to 6 speed, you just have to wire up the reverse lock out.

  • Member
  • Member For: 18y 3m 26d
  • Gender: Male
  • Location: QLD

T56 goes straight in, use the t56 crossmember, wire the reverse lockout to your brake switch and all is done.

Clutch is the same, tailshaft is the same.

Guy on here tells me xou can flash a BF11 tune into PCM if you want.

I havnt done mine as not sure how I go about it as yet.

But hooking lockout to the brake switch works fine, I have no issues with car when driving in 6th gear.

Did you see the T56 last week on eBay, it went for $700 something, what a piss off, mine cost me $5000 from Mel, mine you it's a reco blueprinted box.

Good luck with your finding a t56.

Don't bother putting a t5 back in it.

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 7m 17d
  • Gender: Male
  • Location: Perth

Splines are the same. T5 clutch will fit. unless you enjoy powerlifting 40+ kg gear boxes fit a decent clutch will the box is out.

T5 clutches are hard as custard....

01txr you need a BA2 config not a BF2.

basically any ba that was a factory 6speed, with this config you can wire the reverse lockout too the PCM as per factory.

  • I am dissatisfied with my current employment situation
  • Donating Members
  • Member For: 18y 7m 12d
  • Gender: Male

01txr - I always look on ebay for them and never saw that :(.. shattered

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'