Jump to content

Modified Ba Xr6T Vs Stock Fgxr6T


Jake F6

Recommended Posts

  • Member
  • Member For: 15y 11m 16d
  • Gender: Male
  • Location: Carrum, VIC

my manual fg xr6t put out 258rwkw stock

258 my fg f6 had 261 stock?

what magical dynos are you using? those numbers seem abit high..

mine was 196rwkw stock

mates fg turbo was 215rwkw stock and tuned to 285rwkw...

anyways, like its been said.. fgs power delivery is alot quicker and ballistic. although versing mine with my mates fg both stock, I would be able to keep up with a good launch. so technically your BA should be able to take on a fg

Link to comment
Share on other sites

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 16y 23d
  • Gender: Male

I have run cars from AVO and Mikes Dyno, they both use DTS dynos and the figures come up the same as our DTS dyno. Unfortunatley there is no liscencing or governing body who do regulate Dyno's. My attitude is that if any of my customers wanted to take me to town about figures I know mine will stand up, I'm aware of it happening before and it will happen again.

hi joel,

I run up a ve gts 08 307kw badge manaul car other week,

std tune it made 227rwkw doesnt even add up to whats on badge at motor

and my last version software didnt have air temp probe, no ramp test, only load and speed

my own car made 231rwkw

new software using shootout mode temp probe on wall

mine made 232rwkw

I was surprised it wasnt higher, depends if tuner is honest operator

Link to comment
Share on other sites

  • Member
  • Member For: 14y 4m 4d
  • Gender: Male
  • Location: Eastern Suburbs, Melbourne

what magical dynos are you using? those numbers seem abit high..

mine was 196rwkw stock

mates fg turbo was 215rwkw stock and tuned to 285rwkw...

mine is manual which usually put out higher numbers then the zf, and how is 261 rwkw for an fg f6 high stock numbers ??

Link to comment
Share on other sites

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 6m 20d
  • Gender: Male
  • Location: Gold Coast

Hi guys, thanks for the replies.

My questions weren't really about dyno rwkw but about which car would be quicker on the street. I am looking to upgrade from my modified BA MkII to a stock FG.

Surely someone on here has jumped from a mildly modified BA or BF into an FG?

You're right mate - has gone off topic a bit and I contributed to that :bangcomputer: . I don't think anyone will be able to give you a clear answer because the level of tune will vary, hence the rwkw and dyno debate. Bottom line, both cars make power differently. The FG has far less lag (F6 a little more). Out of the hole, it will get the jump. The BF will need to make not just the same, but more power to catch it. I would take a guess knowing the average FG makes around 218 - 235rwkw (true figures) that your BF is going to need a solid 240 - 250 to catch it over a 400m sprint. Agree with others though, the only real way is for someone to line 'em up :3gears: .

Link to comment
Share on other sites

  • Member
  • Member For: 14y 4m 4d
  • Gender: Male
  • Location: Eastern Suburbs, Melbourne

My mate had a mildly modified ba making about 230rwkw I think, sold it before I got my fg so never raced but it didn't feel as quick as the fg

Link to comment
Share on other sites

  • 3 weeks later...
  • Donating Members
  • Member For: 15y 10m 12d
  • Gender: Male

what about the weight difference between the two?

KVBABY,

I have to protest at your HSV slur. DO SOME RESEARCH MATE!!

HSV stands for Herpes Simplex Virus. I learned this the hard way. I did a Google Image Search for HSV. :w00t2:

PAH

Link to comment
Share on other sites

  • Member
  • Member For: 17y 3m 18d
  • Location: Perth, WA

Hi guys, thanks for the replies.

My questions weren't really about dyno rwkw but about which car would be quicker on the street. I am looking to upgrade from my modified BA MkII to a stock FG.

Surely someone on here has jumped from a mildly modified BA or BF into an FG?

G'day,

My previous car was a BF2 XR6T with BMC Air Filter, F6 CAI and 10PSI tune. It pulled 256rwkw and was equipped with a 6spd ZF Auto.

I'm currently driving a 6spd manual FG XR6T and while it is heaps more fun, the BF hoses all over it in a straight line. I'm at least half a second behind. Probably needs a driver mod though. On the track, I have lapped quicker in the FG around Barbagallo raceway than the modified BF.

Manual vs Manual, my money is on the FG winning more consistently, but it would be pretty even. Put your car up against a ZF6 equipped FG XR6T, and my money is on the FG all night long.

There is plenty of evidence of mid 12 second stock standard FG XR6T's (with the ZF6); put your gonads on the line (literally) and see if you can beat mid 12's. If you cant, you have your answer.

Edited by Inducted_Breeze
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'