Decoding

[katrinaxr6turbo]

Hi,

Can someone please help me. We have just put in a second hand ICC unit into my car as the old one was busted. When we have plugged it in, it comes up saying we need a code. I know this is generally specific to the car but does anyone know where I can find this info? Have looked through all the books and found nothing. Is it easier to take it to Ford and have them decode it?

Thanks

[Adam]

You'll have to take it to Ford for that.

I assume you swapped your original BEM onto the replacement ICC?

[PSI40L]

Did you use your originally bem module. You have to recode it if not. Plus decode occur and graft your remotes again anyone with a decent scanner can do it

[quadie]

Below the ICC is the BEM(the 4 plugs that you undid )

did you swap this unit or use the one with the Replacement ICC

If you didnt swap it , rmove ICC again and swap the BEM unit

if you DID swap it did you RE-SEAT the ICC bus socket?

you will find the instructions contained within my RCA mod (is a sticky)

Also after replacing the ICC switch yor Ignition to on (but not start) for 10 secs then off again then on

( the CAN bus wont talk to the ICC till the IGN is on.)

hope that helps

if you cant swap your bem , your up for a trip to ford to the the BEM recoded