Jump to content

Finally In


xrturbomatty

Recommended Posts

  • Member
  • Member For: 16y 9m 30d

hey guys finally made it 302.3kw big thanks to Steve and all the guys at elite automotive that made it happen couldn't be happier.

ba xr6 turbo ute

built 4 speed auto with 3000rpm stallie and b&m transcooler

Seimens Deka 60lb injectors

walbro intank fuel pump

rapids v3.5 kit

nizpro valve springs

xforce 4inch dump into 3.5inch system

12psi actuator and ported exhaust housing with 38mm flapper

post-14990-128989330261_thumb.jpg

post-14990-128989368643_thumb.jpg

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 16y 2m 29d
  • Gender: Male
  • Location: Adelaide

Was that all you wanted? 300?? with the mods you've got done I thought you'd be able to get more out of it. Don't take my word for it I don't really know what im talking about I've just read alot from the forum and see that people generally get more for the mods you've got listed.

Ohh and congrats :) im sure you get a grin on your face when driving it.

Edited by SHAUNY
Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 10m 6d
  • Gender: Male
  • Location: Vic

Not to bad for such a big stally. Why'd you go 3grand?

How many psi is it running?

If you an get it to hook up should run a good time.

Link to comment
Share on other sites

  • Banned
  • Member For: 15y 6m 9d
  • Gender: Male
  • Location: Aspendale, Vic.

interesting. with a stall id expect at least 320 readout on a conservatory dyno. unless yur motor has done over 150,000km or your only running 15psi or 95 octane.

Chris obviosuly knows what he is doing but yeah ... welcome to the 300kw club!

on 2nd note your running 14psi and creeps up to 17psi in the end... eeeek Although peek power is made on 15psi.

Edited by icer
Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 10m 6d
  • Gender: Male
  • Location: Vic

It's probably spot on for a ba bottom end. 330ish without the stally and you don't want to push a stocker past that. Get it on the track n see how it goes.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 17y 9m 23d
  • Gender: Male
  • Location: Brisbane, Queensland

congrats matt!!!!

pleasure to get it all sorted out for you in the end!!!! :spoton::roflmbo:

And this wasnt tuned by Chris...

I Will be heading out to the drags either tomorrow or saturday if its on matt, I will give you a call and see if you are up for a trip down the 1/4!!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'