adrian_celati Donating Members 82 Member For: 16y 3m 3d Gender: Male Posted 21/02/11 12:39 PM Share Posted 21/02/11 12:39 PM Bump any update?? Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1083107 Share on other sites More sharing options...
Phooned Member 72 Member For: 17y 10m 6d Gender: Male Location: SE Melbourne Posted 22/02/11 01:56 AM Author Share Posted 22/02/11 01:56 AM (edited) Hey Guys,Apologies for the late reply. I just finished 1000Kms roughly 2 weeks ago after installing this kit on my BF Mk II Ghia (as you can tell I hardly drive the thing). The external cooler is great. I have had no dramas with it at all apart from leaking factory o-rings that needed replacing to prevent oil leaks. I drove my car just as I used to in the past (took it easy till the engine water temp was just past the 1/4 mark -- mine usually does this in the first 2kms or so) and it hasn't thrown up any error codes. I did come across some real warm 35*C+ days where I was in the city start-stop cycle and also a few cooler 6*C days and am glad to report that the ZF did not struggle at all. In my opinion, it is a mod worth every penny and for a few $$ outlay, it is cheap insurance. I haven't taken the car to a track, so this area is still untested. But, in saying that I did do some 'spirited' driving (about an hours worth in 28*C weather) on a private road in a mate's farm and everything worked like it should. My turbo is still being tuned with the new mods and I have done roughly 550Kms with it with the same kit installed and with the same result (although I did not push it as hard as the NA -- since I did not have a retune). I will update this post once I get my turbo back and get a chance to push it a bit. Cheers,AJ Edited 22/02/11 01:58 AM by Phooned Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1083195 Share on other sites More sharing options...
wiseman Member 16 Member For: 14y 9m 3d Posted 22/02/11 02:30 AM Share Posted 22/02/11 02:30 AM I have this one in my car too. Its set up as an external cooler. Its a b*****d to fit according to the mechanic that fitted it, but so far no issues. Its only been on a couple of weeks at this stage. Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1083199 Share on other sites More sharing options...
adrian_celati Donating Members 82 Member For: 16y 3m 3d Gender: Male Posted 22/02/11 08:01 AM Share Posted 22/02/11 08:01 AM On 22/02/2011 at 1:56 AM, Phooned said: Hey Guys,Apologies for the late reply. I just finished 1000Kms roughly 2 weeks ago after installing this kit on my BF Mk II Ghia (as you can tell I hardly drive the thing). The external cooler is great. I have had no dramas with it at all apart from leaking factory o-rings that needed replacing to prevent oil leaks. I drove my car just as I used to in the past (took it easy till the engine water temp was just past the 1/4 mark -- mine usually does this in the first 2kms or so) and it hasn't thrown up any error codes. I did come across some real warm 35*C+ days where I was in the city start-stop cycle and also a few cooler 6*C days and am glad to report that the ZF did not struggle at all. In my opinion, it is a mod worth every penny and for a few $$ outlay, it is cheap insurance. I haven't taken the car to a track, so this area is still untested. But, in saying that I did do some 'spirited' driving (about an hours worth in 28*C weather) on a private road in a mate's farm and everything worked like it should. My turbo is still being tuned with the new mods and I have done roughly 550Kms with it with the same kit installed and with the same result (although I did not push it as hard as the NA -- since I did not have a retune). I will update this post once I get my turbo back and get a chance to push it a bit. Cheers,AJThanks AJ.So just to confirm, there's no more heat exchanger, just the external cooler?Cheers. Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1083302 Share on other sites More sharing options...
Phooned Member 72 Member For: 17y 10m 6d Gender: Male Location: SE Melbourne Posted 22/02/11 08:05 AM Author Share Posted 22/02/11 08:05 AM On 22/02/2011 at 8:01 AM, adrian_celati said: ...just the external cooler?Affirmative mate. Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1083304 Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 16y 3m 28d Gender: Male Posted 11/06/11 07:45 AM Share Posted 11/06/11 07:45 AM after a few months were there any issues with these coolers on the ZF? Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1113384 Share on other sites More sharing options...
Phooned Member 72 Member For: 17y 10m 6d Gender: Male Location: SE Melbourne Posted 25/06/11 02:57 PM Author Share Posted 25/06/11 02:57 PM (edited) On 11/06/2011 at 7:45 AM, JC807 said: after a few months were there any issues with these coolers on the ZF?Hey mate...I can confirm my setup is still going strong. I have the occasional ZF clunk when cold (did the same with the heat exchanger previously as well). However, once warmed up, I havent had any drama so far. My turbo is driven fairly hard as well. Edited 25/06/11 02:59 PM by Phooned Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1117436 Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 16y 3m 28d Gender: Male Posted 25/06/11 03:22 PM Share Posted 25/06/11 03:22 PM Sweet. Where did u mount the core? What size and length lines did u use? There are kits on eBay by seller Furious8 I'm thinking of getting one and mounting next to intercooler Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1117437 Share on other sites More sharing options...
SPOOLAX Skids? Donating Members 975 Member For: 15y 11m 7d Gender: Male Location: Adelaide Posted 04/07/11 09:38 AM Share Posted 04/07/11 09:38 AM Same I think this is a must have Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1120092 Share on other sites More sharing options...
KWIK F6 Donating Members 526 Member For: 16y 20d Gender: Male Location: Adelaide Posted 05/07/11 10:49 AM Share Posted 05/07/11 10:49 AM Ill be investing in one of these..cheap insurance... Link to comment https://www.fordxr6turbo.com/forum/topic/71612-bf-zf-transmission-heat-exchanger-bypass/page/3/#findComment-1120391 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now