Jump to content

Recommended Posts

  • New Member
  • Member For: 17y 3m 20d

60-130 mph (96 km/h - 209 kmh) tests become popular.

Did any of you measure from 60 to 130 mph with a Vbox?

Vbox is the logger made by Racelogic. It shows the slope and g data.

For more info check the following link My link

  • Member
  • Member For: 18y 10m 19d
  • Gender: Male
  • Location: Wollongong NSW

60-130 mph (96 km/h - 209 kmh) tests become popular.

Did any of you measure from 60 to 130 mph with a Vbox?

Vbox is the logger made by Racelogic. It shows the slope and g data.

For more info check the following link My link

I have a Vbox (called Performance box here). Id like to know how the 60 to 130 is done.

Do you cruise at just below 60mph then get on it or do you do a standing start??

A stock R35 GTR is supposed to do around 9.5 seconds. Ill find a private road tomorrow and take mine out...will post the results here.

If I can find Rob with his 508rwkw BF we will give that a go as well.

Ive been meaning to post some data from my Performance box for a while now. In my opinion it is one of the best ways to measure any performance gains from mods...(Ive used it mostly on the circuit for lap times etc)

more info on the unit here..

http://www.performancebox.co.uk/

Kev

Edited by Process West
  • flame magnet
  • Gold Donating Members
  • Member For: 16y 11m 5d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

60-130 mph (96 km/h - 209 kmh) tests become popular.

Did any of you measure from 60 to 130 mph with a Vbox?

Vbox is the logger made by Racelogic. It shows the slope and g data.

For more info check the following link My link

umm.... you don't work for racelogic....... do you?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'