Wenier Donating Members 1,736 Member For: 15y 1m 10d Gender: Male Location: Christchurch, New Zealand Posted 27/10/10 04:08 AM Share Posted 27/10/10 04:08 AM Kinda, no crossover at all thou.Go to this page Clicky and same setup as the silver car pictured under v3.5. Link to comment Share on other sites More sharing options...
zayd687 Member 74 Member For: 15y 1m 17d Posted 27/10/10 04:29 AM Author Share Posted 27/10/10 04:29 AM (edited) ok maf is located near the throttle body.... so I can change the pipes anyway.so your sayingremove the std cross over, do exactly as your link/diagram but attach air intake pipe that sits where the battery was and put a pod on it. That air in take pipe will be on the front of the turbo sucking in cold air as the compressor spinssorry for the technical writing I just want to be really sure. Edited 27/10/10 04:35 AM by zayd687 Link to comment Share on other sites More sharing options...
DjGsTa Donating Members 944 Member For: 17y 10m 16d Gender: Male Posted 27/10/10 04:56 AM Share Posted 27/10/10 04:56 AM thought this might helphttp://www.carsales.com.au/all-cars/results.aspx?N=1216+1282+4294966285+4294966463+4294922209&keywords=&Nne=15 Link to comment Share on other sites More sharing options...
zayd687 Member 74 Member For: 15y 1m 17d Posted 27/10/10 10:04 AM Author Share Posted 27/10/10 10:04 AM (edited) hey guys thanks for your replies .. one more question!!!I understand the rapid system cooler setup in regards to running the pipes.what I dont understand is if I dont use the std cross over, where do I mount the stocky blow off valve?is it needed? Edited 27/10/10 10:04 AM by zayd687 Link to comment Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 17y 10m Gender: Male Location: central coast Posted 27/10/10 08:14 PM Share Posted 27/10/10 08:14 PM http://www.fordxr6turbo.com/forum/index.php?showtopic=69675have a look through that page should give you some ideas , and a bov can be fitted to the cold side piping near the throttle body just get the fitting welded into the pipework, or ask when buying the kit they should do it for you. Link to comment Share on other sites More sharing options...
zayd687 Member 74 Member For: 15y 1m 17d Posted 28/10/10 11:20 AM Author Share Posted 28/10/10 11:20 AM ahhh that's some great ideas right there...if only I had some way to clear the block like they did wth their customs cross over from stage 2 one that looks slim and connects to the throttlethat would of been perfect, but I tried with rubber to no use :( it just doesnt shut the bonnetif I had sumthing else that could work perhaps it would same me running the standard cross over and some slim n small strait into the throttle I could chuck out the heavy sh*tty std cross over.ive run the pipies exactly like in stage 2, but a shorter distance as ive used cold piping to come in through the headlight.ill attach pics and you guys can give some ideas what I can fabricate or needI dont think process west would sell me just the middle section :( Link to comment Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 17y 10m Gender: Male Location: central coast Posted 28/10/10 08:10 PM Share Posted 28/10/10 08:10 PM you might be surprised Kev (PW) has helped a lot of people out with bits and pieces. Link to comment Share on other sites More sharing options...
zayd687 Member 74 Member For: 15y 1m 17d Posted 29/10/10 12:16 AM Author Share Posted 29/10/10 12:16 AM ive p.med him.. hopefully he comes through so I can chuck the std cross over at my neighbourthanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now