power_slide Hitting the apex Donating Members 596 Member For: 16y 22d Gender: Male Location: Miranda Posted 18/10/10 09:42 AM Share Posted 18/10/10 09:42 AM Hey Guys been looking for a new set of wheels and its hard to tell what would clear brembos,I thought people could post wheels they have found that clear the brembos here to help others that are searchingI have 1 set at work that I will pop up in the next 2 days if someone dosent beat me to it Link to comment Share on other sites More sharing options...
Guest XR09 Guests Posted 18/10/10 10:00 AM Share Posted 18/10/10 10:00 AM Speedy inferno'sStaggered fitment ie. (2) 19 x 8.5s and (2) 19 x 9.5s PCD 114.3 & Offsets ET 35 & 38 They clear the Brembo's by miles, well enough to get a finger in between when cleaning them.And they fill out the rear guards on an FG Link to comment Share on other sites More sharing options...
Turbo6FG Silver Donating Members 497 Member For: 14y 8m 7d Gender: Male Posted 18/10/10 10:23 AM Share Posted 18/10/10 10:23 AM Fitted on my FG ute:ADVAN Racing RS19x9 front 35 offset 19x10 rear 38 offset Brembo clearance is no probs. Link to comment Share on other sites More sharing options...
winstor Member 611 Member For: 15y 8m 12d Posted 18/10/10 10:30 AM Share Posted 18/10/10 10:30 AM (edited) Nismo LM GT4s19x8.5 +2519x9.5 +30Enkei PF01s18x8.5 +3018x10.5 +38 Edited 18/10/10 10:42 AM by winstor Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 9m 20d Gender: Male Location: Brisbane, QLD Posted 18/10/10 09:54 PM Share Posted 18/10/10 09:54 PM I was about to start a similar thread power slide.Im buying wheels for the FG today and wasnt 100% sure on what to get.Been looking at the BBS CH Matt Black wheels in a 19inch. 10inch wide rears and 8inch fronts.Those Nismo wheels look pretty good. Link to comment Share on other sites More sharing options...
Turbo6FG Silver Donating Members 497 Member For: 14y 8m 7d Gender: Male Posted 18/10/10 10:45 PM Share Posted 18/10/10 10:45 PM (edited) Should make this a sticky.I was going to go for the BBS CH but the guy at AMG said due to the offset of the 10s on the rear I'd need to pump the guards. Pity. If you got custom rims made I reckon you could fit an 11 under the FG ute rear, there's so much space. Edited 18/10/10 10:47 PM by Turbo6FG Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 18d Gender: Male Location: Dianella, West Oz Posted 19/10/10 12:22 AM Share Posted 19/10/10 12:22 AM Them Enkei's are fukin PORN!As are the BBS' (have a look at Ramons 6F6 thread in the XFT section for pics of black on black), as are Turbo6FG's Advans and as im sure the Nismo LMGT4's are! Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 9m 20d Gender: Male Location: Brisbane, QLD Posted 19/10/10 04:54 AM Share Posted 19/10/10 04:54 AM That's funny Turbo6FG, the lads at AMG havnt said the same thing to me about the 10's. What offset were you looking at?Im hoping Ramon doesnt think im copying him (again). Link to comment Share on other sites More sharing options...
Turbo6FG Silver Donating Members 497 Member For: 14y 8m 7d Gender: Male Posted 19/10/10 05:04 AM Share Posted 19/10/10 05:04 AM This is what Chris said to me on an email. I dunno what offset they were I just saw them on the site & he reckoned 9.5 was the biggest it could go.It's not the fact you can't fit a 19x10 on the rear of this car its more the Offset of 19x10 BBS CH comes in is too high.. If you wanted to flare rear guards you could make these fit, but this would require Guard modification. Dunno though. maybe they have tried them now & realise they fit. The FG utes have so much room either side I was surprised he said they wouldn't. Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 18d Gender: Male Location: Dianella, West Oz Posted 19/10/10 05:30 AM Share Posted 19/10/10 05:30 AM Karl - DO IT!!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now