0-100 Times

[tsammons]

  On 20/11/2012 at 12:47 PM, -SteveR- said:

I can guarantee it's not spinning when it crosses 100km/h with only low 300s rwkw and KU31's. Here's the graph!

Easily done in LiveLink/XCAL by measuring vehicle speed and a little excel work to zero out time when speed starts registering positive numbers (in this case 0.2658767 mph which I convert to kmh).

I can see stall RPM was 1700 in original file.

can you upload yur excel spreadsheet im lazy as sh*t

[discostig]

Here ya go! This is a snippet of a longer log, which is why time value starts at 385.58 seconds.

2010-12-18b best 0-100.xls

[#96]

  On 24/11/2012 at 9:26 AM, Vevapower said:

Steve yours from your slip works out to be 2.33 secs.

For anyone else that wants to calculate their from their slip use this spreadsheet I have attached.

Guys you just need to add your data to the yellow parts of the spread sheet and it will calculate your 0 - 100 time.

cheers for that.

all of my passes seem to have a higher actual speed than that which is calculated. only maybe 2kph, but still.

works out to be a 4.7 to 100 of my 2.145 60', and 4.74 to 100 of a 1.956 60' which I ballsed a gear change on.

gotta think it would be a tenth (or two?) quicker given how much quicker it can get away from the line (if I dont arse the gear up again)

though to be fair, you should add a fraction to that time, as you do get about 6-12"s of rolling start.

either way, sub 5 to 100... impressive ford! (all stock, oem tires)

[ledoff]

keen to test mine out tomorrow, previous owner got 3.6 with crappy tyers on the strip with 396 rwkw

[ledoff]

  On 04/01/2013 at 6:21 AM, ledoff said:

keen to test mine out tomorrow, previous owner got 3.6 with crappy tyers on the strip with 396 rwkw

*allegedly